Might be switching to a 8 3/4 rearend. Already have a posi pumpkin from my race car I can put in. Sent from my E6810 using The H.A.M.B. mobile app
Picked up a 66 B body Dodge 8 3/4 housing and axles. To put in the Chevy. I will be pulling the Chevy rearend. Sent from my E6810 using The H.A.M.B. mobile app
Had my buddy at JS customs do some more work while I am waiting on my paint guy to get a opening. Removed the air box from inner fender. My car never had it even used. Sent from my E6810 using The H.A.M.B. mobile app
Well she finally made it to the blast shop. Next pictures will be after blasting. Sent from my E6810 using The H.A.M.B. mobile app
Well she is now in a sandable seal coat primer. Also got parts back for the dash. Glove box door lettered and clock block off plate. Sent from my E6810 using The H.A.M.B. mobile app
I see you already have a plan for tail lights, what I was going to suggest, is to install 57 Corvette lights in the fenders like I did on my 47. I love the progress. Bob
I have always liked the 50 Buick taillights. Just picked up glass lenses for them. Stopped by the shop today and newest update. Roumded corners on deck lid. Sent from my E6810 using The H.A.M.B. mobile app
Sorry, that was back at a time when I didn't think to take many pictures of things. I have a couple more, but I don't want to jump on his thread. I just wanted to pass on an idea from what I did to my car in 1962. Other than cleaning and filling the hood and trunk, and frenching the headlights, the body was stock. All the big changes were done to the running gear. Bob
Packard transmission is going to the side. I am going to run a automatic instead. That and if I jump on it I don't want to break as easily. If a th400 breaks I can at least get parts. Sent from my E6810 using The H.A.M.B. mobile app
Well got some paint on the super deluxe heater box. This is the color the body will be. Sent from my E6910 using The H.A.M.B. mobile app
Got the heater assembled just needs some striping and lettering. Sent from my E6910 using The H.A.M.B. mobile app
Anyone have any extra of these? Cup type washer goes in back of dash and on heater box. Sent from my E6910 using The H.A.M.B. mobile app
Got the heater box back from a buddy for pin striping and lettering. Also installed knobs from NumNob Sent from my E6910 using The H.A.M.B. mobile app
Well finished up the generator/alternator brackets on the hemi today. Sent from my E6910 using The H.A.M.B. mobile app
JR Nelson in Tacoma finished the pin stripping on the dash yesterday. The plain white area was driving me nuts. Sent from my E6910 using The H.A.M.B. mobile app
The Jalopy Journal
