Projects What's On Your Engine Stand

1947 Buick 320 going into my '37 coupe and getting a string of Carter W-1's

 

Got a real documented DZ 302 just waitin for the right car to stuff it in.

 

Any pictures????.....

 

this dang ol anchor
IMG_3628 by David Mullett, on Flickr

 

Looks like a Ferd fe...

 

250 Chevy six banger going with headers and Clifford aluminum intake with a 4 speed.

 

'56 D500,.040 over,10.5 Ross forged pistons,solid lifter cam destined for my super rare '56 D500 wagon with factory o.d.

 

These V/c were made by Genie Shifter . Lots of fun with them. This was on a 271 k model eng in a 28 roadster pick up. It also had the 1/2 letter Cobra intake and correct oil pan.

 

yes sir, its a 360 FE

 

The foundation for a Paxton supercharged 5.0.
I know, not very traditional, but you asked.

 

Thanks for keeping it Ford.

 

Rover/Buick and a Flattie

Sent from my SM-N960U using The H.A.M.B. mobile app

 

Inspired by Bob Blakes V16 '17 Dodge, I snagged this 1930 Cadillac V16 for a future hot rod project.

 

In my never ending quest to improve my cylinder index, I couldn't pass up this packard V12

 

The straight 8 out of my 29 Dueseneberg Model J is also on a stand in my shop now as I am rebuilding it. Due to the length and weight, I had to beef up a bus engine stand.

 

I hauled this Chrysler 265 home in the back seat of my pickup. I have an edmunds head and 3 carb intake for it...

 

Your grandma should put some clothes on & the comments would stop.

 

What am I looking at here guys?
I see Ford blue, is it a Boss9?

 

69 DZ 302 — NOS Scott SBC 8-stack injection

 

1970 BOSS 302 — in my roadster now

 

Well it was. it's in the car running now

 

Another -- Original Ardun

 

5 different colors of paint and about an inch of dust.

 

not to get all Bernie Sanders here but i dont think i could drive a car with that engine in it with out a chubby being in the way. lol

 

What's a chubby?

 

Dust and cobwebs


Sent from my iPhone using The H.A.M.B. mobile app

 

I have a nicely rebuilt 392 Hemi. It has adjustable rockers and some other goodies but not overly powerful. Just a good street motor. I'll need to change the valve covers to the dimpled version due to the adjustable rockers will hit the original covers. Might be open to trading covers with someone.