As the subject says, I'm trying to figure out if Advance Adapters 712548 bellhousing will mount a '96 Camaro WC T5 (1352-247) to a '66 327. I want a hydraulic slave cylinder to use with my Walton Fab clutch pedal setup in my '54 Chevy. I appreciate any help on this. I have googled, and searched for hours and this looks like an option. I already have the transmission.
I used a steel scattershield, drilled the Ford bolt pattern into it and welded threaded slugs into the inside of the scattershield If you have to use a hydraulic throw out they are available as external push or pull type and there’s the internal type that replaces the throw out bearing.