SDRA from Tulsa represents at MoKan Slant 6 race

Bill Kendall represented the SDRA crowd at the first Slant 6 race of the 2019 season at MoKan dragway this past weekend. Thanks for representing Bill!

 

Here's another shot of Bill's SDRA. He was dialed in at 11.42.

 

Nice that you guys are getting around. I used to be on the slant six site . They're a bunch of crazy guys, in a good way.

11.42 is an impressive number.

 

That's a very impressive number. What modifications have been done and is that an auto or manual gearbox?

 

I wasn't there to see the car myself. SDRA would make it an automatic.

I looked at the printout again. He ran 11.61 @ 112 MPH and cut a .0150 light.

 

I just received my registration for this site. Great site!
My car (42) has a slant 6, bored .120 (238 Cu in.) and has Ross pistons calculated for 13/1 compression. Cam from Hughes engines. Holley 4 brl on an Offenhauser manifold. 11.61 was not my best time of the day but I don't have my slip here at work. I ran against a car that was 8 seconds slower and that caused me to have a poor start. I know Excuses Excuses. I will get my slip so I don't tell any lies.

 

Welcome to the site Bill!! And thanks for posting.

 

Welcome aboard, Bill. Got a close up pic your car?

 

Jeff Kendall (Bill’s son) is now representing with his Slant 6 powered SDRA. He's leading the points race by winning at MoKan and earning more points at Knoxville. He also set the open AA/Gas 1/8 mile record and plans to submit his time slips from the MoKan race to re-set the 1/4 mile record. He said he was running 11.20s at MoKan. Fun stuff!!