Register now to get rid of these ads!

Projects 32 Ford 3 window FIND

Discussion in 'Traditional Hot Rods' started by 383deuce, Mar 29, 2014.

  1. Cyclone Kevin
    Joined: Apr 15, 2002
    Posts: 4,223

    Cyclone Kevin
    Alliance Vendor

    Well, a Happy Year all the way around!!!!
    Wishing you the best!!!!!!!!!
    Thx 4 the update. :).
     
  2. Well Kevin, I was wrong about him pulling the motor, but he did get it running for sure. Sounds like he replaced the front end parts and it moves under it's own power. He said it looks like it lost a street fight as it is bent every way you can think. Would not try to drive it on the street due to the frame so far out of wack.
     
    loudbang likes this.
  3. Speed week is right around the corner......Hope to see you all on the salt....
     
    Runnin shine likes this.
  4. birdog
    Joined: Nov 25, 2010
    Posts: 426

    birdog
    Member
    from Monroe, UT

  5. fonti
    Joined: Nov 28, 2006
    Posts: 494

    fonti
    Member

    Hope to make it again next year...have fun!
     
  6. Well as they say hot rods are never done! At long last I found a football tact and it was converted over to elec. Got it installed in the 3 window and love it...Looks right at home in the deuce.
     
    509garyd likes this.
  7. big duece
    Joined: Jul 28, 2008
    Posts: 6,830

    big duece
    Member
    from kansas

    Glad to hear you got it to work properly!
     
  8. Got the hook up instructions from you & got it right the first time. Works great! Thank's for the help
     
    509garyd likes this.
  9. Up Date! Getting ready to head out for Texas to attend the HRSD in Wimberly this weekend. Checked the weather out just now and things not looking good in Kansas. Snowing and I70 shut down in Salina. Sure hope things improve as I am hitting the road in the morning.
     
    big duece, Gotgas and kidcampbell71 like this.
  10. figure8
    Joined: Oct 4, 2006
    Posts: 95

    figure8
    Member

    Good luck on your trip. Be safe


    Sent from my iPhone using H.A.M.B.
     
    loudbang likes this.
  11. alchemy
    Joined: Sep 27, 2002
    Posts: 20,405

    alchemy
    Member

    Does rooster tail spray freeze in mid-air if the temp is cold enough?
     
    loudbang likes this.
  12. Tim
    Joined: Mar 2, 2001
    Posts: 17,091

    Tim
    Member
    from KCMO

    No problem here in the city man! Truck on down! Doubt we get more than a dusting in the am that won’t even stick around.
     
    loudbang likes this.
  13. Tim
    Joined: Mar 2, 2001
    Posts: 17,091

    Tim
    Member
    from KCMO

    I bet it could if it hung onto a backing plate or something. Cory Taulbert had his 5 window just covered in ice a couple years ago cutting across some bad weather to the round up
     
    loudbang likes this.
  14. big duece
    Joined: Jul 28, 2008
    Posts: 6,830

    big duece
    Member
    from kansas

    loudbang likes this.
  15. fonti
    Joined: Nov 28, 2006
    Posts: 494

    fonti
    Member

    safe travels Dennis!
     
    509garyd, kidcampbell71 and loudbang like this.
  16. Runnin shine
    Joined: Apr 12, 2013
    Posts: 3,337

    Runnin shine
    Member

  17. Wyatt,
    Long time no talk to ya. Not much going on here in the flat lands of Nebraska. Been laying low due to this dam viris crap. Went to the show down in Texas in Feb. and had not been anywhere since until last weekend. Went to KC to the greeserama show that my daughter belongs to the club that puts the show on.
    Great time and it sure was good to get out. Not much going on in the shop as of late. Helped a good friend put together a 31 Model A coupe this spring and rebuilt the motor in my John Deer garden tractor. So then I had to sand it all down and give it a new paint job. Looks like a new mower now.
    Hope all is well on your end.
     
  18. Runnin shine
    Joined: Apr 12, 2013
    Posts: 3,337

    Runnin shine
    Member

  19. Tim
    Joined: Mar 2, 2001
    Posts: 17,091

    Tim
    Member
    from KCMO

  20. Great build. What are the wheels you are running?
     
  21. Tim
    Joined: Mar 2, 2001
    Posts: 17,091

    Tim
    Member
    from KCMO

    Pretty sure they are rocket igniters
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.