Hot Rods Jerry 's 32 5 Window Project

A pillar garnish moldings.

Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

Visited the engine shop this morning. My 331 caddy it's just about ready for assembly. Bored out, crank polished, heads surfaced. Nasty isky cam.Don Eskey Speed and Machine

Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

Tail light buckets in and trunk gap fine tuned

Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

Body apart and off to blast

Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

Understatement of the year! Looks awesome. I enjoy watching your builds. Great knowing this talent is local


Sent from my iPhone using The H.A.M.B. mobile app

 

Matt at Gear Drive was nice enough to make me up a pair of 1936 drive shaft tubes. These are going to be dump tubes that run underneath and along my frame. The caps will get wingnuts

rails.

Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

Exhaust caps look great!

 

Got some paint on my pedal assembly this morning. I had some of the color mixed up in a single stage for some of the smaller parts like this that I can do myself. Hoping to get the pedal assembly installed on the frame later tonight and then I can start running my brake lines.

Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

Great build - very slick details!

 

Another snow day off from work freed up some time to install the open drive kit from Hot Rod Works in Idaho. Good product.

Brake line and frame clips also showed up in the mail

Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

Working on my pedals tonight. Cleaning and painting the pushrods and Associated Hardware.

Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

The weather cleared up a little bit today so me and my friend Brooke blasted the body outside. Got everything nice and clean

Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

Nose up and sealed in epoxy

Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

Primed

Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

Body dropped off at the painter...working on caps tonight with these wingnuts I found


Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

Door handle pits getting sandedout before plating.

Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

Intake got polished up!

Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

Dave can put some nice scallops on that for you.

 

Intake is quite SPIFFY now

 

Spent some time cleaning up my steering box tonight

Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

Those look like old bicycle parts. 1960s “quick release” axle wing nuts, before the modern cam lock design.


Sent from my iPad using The H.A.M.B. mobile app

 

Yup! Good eye!


Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

Can’t wait to see it all back together!

 

Some careful Plumbing tonight on some shiny parts. Running a PCV system and got my fittings in and ready to go.

Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

Spent the morning afternoon at Don the Plater's Place helping him finishing up some parts

Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

Windshield frame

https://www.instagram.com/p/Btq9Hrl...tm_source=ig_share_sheet&igshid=1kslrfon2olm3

Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

Are you going to install the glass?

 

Yeah.. I have a good local glass shop that will cut everything out though

Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

Very nice!

 

Floor shot with bedliner

Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app