Hot Rods '30-'31 "A" Cpe. Door gap

'30-'31 Coupe (45B) Inside of car , facing door rear edge & B pillar..Whats the gap between the door shell rear edge to the B pillar... Interested in @top ,@ lock area,and bottom...Logic says it should be even , but would appreciate some real world measurements...
If someone has a car with good fitting doors could measure the inside gap for me ,I would greatly appreciate it
I'm trying to verify fitment before I fasten anything permanently..

BTW :
Please ,Please don't suggest Ford Barn..I have asked this question over there several times with several different wordings and get nothing but flak...

Thanks ,
Stan

 

I can measure the gap on my 32's if that would help. They've never been off. Let me know if you're interested. Good luck.

 

I’ve got my coupe shimmed up, can take a picture tonight.


Sent from my iPhone using The H.A.M.B. mobile app

 

Thanks guys...Any help appreciated...
Stan

 

I have 1/4” at the window area and 7/16” at the mid point between floor and window. It is same on both sides, 30-31 coupe.


Sent from my iPhone using The H.A.M.B. mobile app

 

3/16" top to bottom both cars. 32 coupes however. Hope that helps!

 

WB69 ..Thanks a ton ,thats exactly the info I needed
31Apickup ...You hit the nail on the head with those super pics..I also had been wondering how those triangle corner braces fit and that answers a lot of questions
Thanks to both of you for taking the time to help me !!!
Long Live the HAMB and the good people that hang around this joint...
Stan