How many run a 2" blower drive?.I ran a 2" belt and pulleys on a blown 350 Chevy for years. Just fitting the same to my Hemi.
hey, nice rig. What water neck and crossover is that? Can you post a picture of the other side too? I run a 2" belt. Like the way they look.
I have a 2" also, I always thought the three inch was overkill for a street engine and it was a packaging issue on my car. If I had wanted a 3" it would have meant relocating the radiator more than I did and for sure I didn't want the grille shell that far forward on the frame. Another thing I wanted was a low mounted alternator . With a Vega box in the way on the driver side I cut the fuel pump boss off and fabbed a bracket so I could have the alternator down low.
Tudor here,s a pic of the crossover without the blower belt etc in the way.I got it off ebay a couple years ago, the guy I got it from was making these and oil filter adapters.It takes a Chevy thermostat
Always glad to see the "traditional" 1/2 inch pitch drive system, especially the 2" version. The metric pitch pulleys and belts really stand out as too modern.
Heres my 2" 1/2 pitch set up on my 41.... Just get it all together at time of this picture... A 3" set up would have made things real interesting with the radiator rans... Sent from my SM-G955U using The H.A.M.B. mobile app
The Jalopy Journal
