Hot Rods THE INDUCTION THREAD

I apologize in advance Knuck, but where’s the induction system in the photo?


Sent from my iPhone using The H.A.M.B. mobile app

 

️


Sent from my iPhone using The H.A.M.B. mobile app

 

This looks like someone tried to add every part available. I do like the earlier blower.

 

Here’s a couple from NSRA Bakersfield this year.


Sent from my iPhone using The H.A.M.B. mobile app

 

Earlier blower? pretty sure that's a B&M unit, a friend of mine had a saying "they are like a blower, only smaller".

That car is a bit of a "mishmash".

 

^^^^Nice shot, I can almost smell the alcohol .

 

Ol, Wild Turkey 101 proof...

 

Bought and then traded this Injection setup for a FE 2X4 Low Riser manifold and correct carbs, my engine of choice is a FE. Notice no pump

Movin/on

 

Sent from my SAMSUNG-SM-G930A using The H.A.M.B. mobile app

 

Sent from my SAMSUNG-SM-G930A using The H.A.M.B. mobile app

 

My dad found this sitting in a shop forever. Real early 426 race hemi cross ram AFB carbs matching pair still have the tags on. Original offenhauser dual 4 barrel manifold, say-why-and valve covers on a 348 "W" that was in a T-bucket from the 60's. The guy bought the car for the engine and got rid of the car. And then never used the engine just sat for 30+ years. We bought it and we were going to stick it in our '55 Gasser but we tore it down and found out it had been sabotaged. I guess the story go's, the guy was a real asshole. So his employees dumped all kinds of chemicals, paint and whatever down the intake. Ate one of the Pistons clean through to where it had a little hole and destroyed the cylinder. We sold the engine separate from the valve covers and carbs.The guy who bought the engine was putting it in a Impala and sleeved the cylinder, so it did get saved.

Sent from my Pixel 2 using Tapatalk

 

Just swallowed my chewing gum......wow

Sent from my Pixel 2 using Tapatalk

 

Small one

 

I posted similar pictures to this one, but these just look so cool.

 

3 frogs

 

T-Bird tri-power as noted by the emblem on the air cleaner but more importantly the flat carburetor mounting pads as compared to the angle of the 406 passenger car manifold.

 

That intake could use some 1.00" risers...

 

Ramchargers Engineering at it's finest

Sent from my SAMSUNG-SM-G930A using The H.A.M.B. mobile app