Projects 1934 ford three window project

Like it, top job


Sent from my iPad using H.A.M.B.

 

Ok trans shifter is killer but the one thing everyone is over looking here is the fact you got it hooked to a v12!!!!!!!!!!!!


Sent from my iPhone using The H.A.M.B. mobile app

 

Got the rear window wood sorted. I got the wood in a trade, so we didn’t have to make it.




Sent from my iPad using The H.A.M.B. mobile app

 

Yeh, I’ve been toying with the idea of stretching the frame and hood a little also.


Sent from my iPad using The H.A.M.B. mobile app

 

Thanks


Sent from my iPad using The H.A.M.B. mobile app

 

uggghh... please don't.

3blap.

 

enjoying this keep the updates coming, I'm an ol skool carpenter from England so the wood work is my thing

 

Sent from my iPad using The H.A.M.B. mobile app

 

Got the slave cylinder sorted.




Sent from my iPad using The H.A.M.B. mobile app

 

Thanks, that’s about the last of the wood.


Sent from my iPad using The H.A.M.B. mobile app

 

So, how did you decide on the position of the shifter? Did I miss some mock up photos earlier?

 

Looks like the wood went to a good home! Looking good!

Sent from my SM-G930V using The H.A.M.B. mobile app

 

Shifter looks great!! I have a feeling it will hit the dash though.

 

I measured a stock setup from the front of the engine and then left enough room for the firewall. I can manipulate it around the dash as needed once I get there. I think it will still be aft of the stock setup.


Sent from my iPad using The H.A.M.B. mobile app

 

Got it! Thanks for the reply.

 

I’ve been working on parts for both the coupe and the roadster project




Sent from my iPad using The H.A.M.B. mobile app

 

Did this a while back. I had one nice door garnish, that came with the body. Took a pair of 4-door moldings and...presto.

 

Elvis, is that stick a LaSalle repop from 'Hot Rod John'? Great engineering, and love the V12!

 

Thanks,
I got it from a fellow H.A.M.B.er... don’t know original origins


Sent from my iPad using The H.A.M.B. mobile app

 

nice work keep it coming good luck with it

 

Made the wood for the seat and assembled







Replaced the bolts in the seat rails




Sent from my iPad using The H.A.M.B. mobile app

 

NICE WORK

 

Thanks, how is the phaeton coming along?


Sent from my iPad using The H.A.M.B. mobile app

 

Getting ready to build up some floors/bodies. I posted pictures of the rotisserie I built in my roadster thread also. Still need some bracing






Sent from my iPad using The H.A.M.B. mobile app

 

Very impressive. Great work.

 

Much easier to recess the firewall. See my thread “original paint coupe”.

 

Did some strengthening of the rotisserie




Sent from my iPad using The H.A.M.B. mobile app

 

Started working on the floor. I thought I would be able to use the subrails, but in the end I cut them off and will use reproduction. It’s not the best floor, but it’s clean...I had it media blasted a few years ago.





Couple more bullet holes








Sent from my iPad using The H.A.M.B. mobile app