Register now to get rid of these ads!
Auctions

1941 Chevy coupe - 235-T5, runs, drives, solid body, Trade?

Discussion in 'Cars For Sale' started by Barsteel, Jul 27, 2018.

  1. Barsteel
    Joined: Oct 15, 2008
    Posts: 732

    Barsteel
    Member
    from Monroe, CT

    City: Stratford

    State: Connecticut
    Price: 7500
    1941 Chevy Coupe - Rebuilt 235 with dual Webers and split Fenton exhaust manifolds, full back dual system with Turbo muffler that give a nice mellow tone. The transmission is rebuilt Borg Warner T5 from a V6 S10 IIRC. Properly set up with the S10 tailshaft, relocated speedo gear, and a Hurst shifter. The rear end is from a 56 Chevy. It was professionally rebuilt and set up with new gears, bearings, and seals. The original rear leaf springs were replaced with the proper updated wider non-torque tube leaf springs and a tube shock conversion. The car has a new wiring harness installed by the previous owner, and it has been converted to a GM 1 wire alternator. The engine has electronic ignition, and is cooled by a new aluminum radiator. The previous owner also installed a manually operated cooling fan, although I don't know why because I've NEVER had to use it. The car runs perfectly cool. Rims where converted to standard chevy 5 lug wheels, and the tires are wide radials with less than 5000 miles on them. The engine had new belts and hoses installed when the engine was built. The existing except for the oil gauges work, and that's because the old oil pressure gauge only went up to 15 or 20lbs. The new mechanical Borg Warner oil pressure gauge shows a strong 40lbs of pressure. The engine runs strong and burns no oil.

    The previous owner installed a horrible looking mid-80s GM truck steering wheel, but I have the original wheel that will come with the car.

    This car is UNRESTORED, as found, except of the mechanical upgrades. It has the original upholstery and headliner, but it's not in the greatest shape. The door panels are frayed at the edges, the seat upholstery is torn, and there are a few tears in the headliner, but it's all there. Back seat is in very good shape because it has a 50s seat cover that doesn't ever looked to have been removed.

    Floor has a few minor (1/2" wide x 3" long) rust holes, but it generally very solid. The frame is rock solid, although it has surface rust. The trunk is solid as well.

    The inner rockers are rusted through, and will need to be replaced, as is the middle body mount, but that's a relatively easy repair.

    The car starts, runs, drives, and stops reliably.

    CT does not title cars over 20 years old, so I do not have a title. I will provide an official State of CT bill of sale with my name and address, a copy of the current registration, and a copy of a letter from CT DMV stating CT's title policy.

    TRADES? I like '54 Fords, most trucks, 50-51 Studebaker starlight coupes, '59 Buicks, most any muscle car, REALLY PREFER STICKS. No basket cases, seriously unfinished projects, anything you'd call a "rat rod", anything heavily customized. No 4 doors. Try me. Worst I can say is no.

    Down from $8500 to $7500. Located in Stratford, CT.

    If you're going to lowball me, don't.

    PM me, or call/test 203-515-5726.
     

    Attached Files:

    Last edited: Aug 10, 2019
    catdad49, BrandonB, rjones35 and 2 others like this.
  2. Barsteel
    Joined: Oct 15, 2008
    Posts: 732

    Barsteel
    Member
    from Monroe, CT

  3. Barsteel
    Joined: Oct 15, 2008
    Posts: 732

    Barsteel
    Member
    from Monroe, CT

  4. Barsteel
    Joined: Oct 15, 2008
    Posts: 732

    Barsteel
    Member
    from Monroe, CT


  5. Barsteel
    Joined: Oct 15, 2008
    Posts: 732

    Barsteel
    Member
    from Monroe, CT

  6. Barsteel
    Joined: Oct 15, 2008
    Posts: 732

    Barsteel
    Member
    from Monroe, CT

  7. Barsteel
    Joined: Oct 15, 2008
    Posts: 732

    Barsteel
    Member
    from Monroe, CT

  8. Barsteel
    Joined: Oct 15, 2008
    Posts: 732

    Barsteel
    Member
    from Monroe, CT

  9. Barsteel
    Joined: Oct 15, 2008
    Posts: 732

    Barsteel
    Member
    from Monroe, CT

  10. Barsteel
    Joined: Oct 15, 2008
    Posts: 732

    Barsteel
    Member
    from Monroe, CT

  11. Barsteel
    Joined: Oct 15, 2008
    Posts: 732

    Barsteel
    Member
    from Monroe, CT

  12. Barsteel
    Joined: Oct 15, 2008
    Posts: 732

    Barsteel
    Member
    from Monroe, CT

  13. Barsteel
    Joined: Oct 15, 2008
    Posts: 732

    Barsteel
    Member
    from Monroe, CT

    Ok, I've had a few offers of trades, even though the ad says "no trades". So...if you MUST offer me a trade, here's what I might consider, although I'm really looking for cash to put into my business. There's also a list of what I will not consider.

    I will NOT consider:
    Any non-running projects/basket cases/rust buckets
    ANYTHING with an automatic UNLESS it's a 59 - 60 Buick
    No 4 doors
    No foreign cars, bikes, boats, motorhomes, anything non-automotive
    No station wagons or similar vehicles

    I MAY consider:
    Any OT muscle car with a stick - no clones - I like Mopars, but will consider all comers
    50 - 51 2dr bullet nose studebaker Starlight
    54 Ford
    59 - 60 Buick
    60 - 61 Plymouth
    Any late 50s - early 60s Mopars

    Again - I really would like cash, but LMK what you have.
     
    twostickmutt likes this.
  14. Barsteel
    Joined: Oct 15, 2008
    Posts: 732

    Barsteel
    Member
    from Monroe, CT

  15. Barsteel
    Joined: Oct 15, 2008
    Posts: 732

    Barsteel
    Member
    from Monroe, CT

  16. Barsteel
    Joined: Oct 15, 2008
    Posts: 732

    Barsteel
    Member
    from Monroe, CT

    So no one likes my car? Guess I'll have to keep it....
     
  17. Barsteel
    Joined: Oct 15, 2008
    Posts: 732

    Barsteel
    Member
    from Monroe, CT

    C'mon...you know you want it...
     
    6inarow and ROCKER77 like this.
  18. Barsteel
    Joined: Oct 15, 2008
    Posts: 732

    Barsteel
    Member
    from Monroe, CT

    $7500.

    Bump. Still have it....

    Will consider trades - strongly prefer a stick, LMK what you have.
     
  19. Barsteel
    Joined: Oct 15, 2008
    Posts: 732

    Barsteel
    Member
    from Monroe, CT

    SOLD!!!!!! Finally, someone who appreciates Chevy Coupes....
     
    ROCKER77 likes this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.