Register now to get rid of these ads!

Projects 1930 Model A Progress

Discussion in 'Traditional Hot Rods' started by Paul F, Feb 4, 2018.

  1. Paul F
    Joined: Dec 30, 2017
    Posts: 74

    Paul F

    I used 2" flex Fuel Hose...
    From Filler Neck Supply Company
     
    Dino 64 likes this.
  2. GordonC
    Joined: Mar 6, 2006
    Posts: 3,141

    GordonC
    ALLIANCE MEMBER

    Cool!
     
    Paul F likes this.
  3. Paul F
    Joined: Dec 30, 2017
    Posts: 74

    Paul F

    Setting in the dash...no interference behind the gauges...very happy... IMG_3353.JPG


    Sent from my iPhone using H.A.M.B.
     
  4. Paul F
    Joined: Dec 30, 2017
    Posts: 74

    Paul F

    It’s been a while...working hard...but...frame is here! Wheels and tires, ragtop,...rear end...ready to go!!![​IMG]


    Sent from my iPhone using H.A.M.B.
     
  5. Paul F
    Joined: Dec 30, 2017
    Posts: 74

    Paul F

    Update...well rear end is built, Rag top fitment is good, firewall off...building front end..[​IMG][​IMG][​IMG]


    Sent from my iPhone using H.A.M.B.
     
    walter, JOYFLEA and Jet96 like this.
  6. 3banjos
    Joined: May 24, 2008
    Posts: 480

    3banjos
    Member
    from NZ

    Any plans to add a K-member, or some angular bracing.
     
    nunattax likes this.
  7. Paul F
    Joined: Dec 30, 2017
    Posts: 74

    Paul F

    Ummm no, I had not planned on that...


    Sent from my iPhone using H.A.M.B.
     
  8. Paul F
    Joined: Dec 30, 2017
    Posts: 74

    Paul F

    [​IMG] front end assembly...here I come!


    Sent from my iPhone using H.A.M.B.
     
    walter likes this.
  9. Paul F
    Joined: Dec 30, 2017
    Posts: 74

    Paul F

    Workin’ away...[​IMG][​IMG]


    Sent from my iPhone using H.A.M.B.
     
    louisb likes this.
  10. Paul F
    Joined: Dec 30, 2017
    Posts: 74

    Paul F

    Update: Rolling Chassis complete...time to drop in the Engine and Trans![​IMG][​IMG][​IMG]


    Sent from my iPhone using H.A.M.B.
     
  11. 3banjos
    Joined: May 24, 2008
    Posts: 480

    3banjos
    Member
    from NZ

    Just planning a little ahead, have you drilled and tapped some holes for clipping your headlight harness and battery cable etc. PITA once that donk's in the way. Also wouldn't hurt to have a couple more clips on the brake line.
    Of note, how close does that panhard get when the weight goes on.
     
    -Brent- likes this.
  12. Mike Colemire
    Joined: May 18, 2013
    Posts: 1,428

    Mike Colemire
    Member

    I don't know if he drilled any holes but I'm glad you reminded me. Nice build and fab work, going to make a cool hot rod. Now to add that to my list.
     
  13. Paul F
    Joined: Dec 30, 2017
    Posts: 74

    Paul F

    Panhard clears...thanks for the feedback!


    Sent from my iPhone using H.A.M.B.
     
  14. Paul F
    Joined: Dec 30, 2017
    Posts: 74

    Paul F

    [​IMG]working on fitment...



    Sent from my iPhone using H.A.M.B.
     
  15. Paul F
    Joined: Dec 30, 2017
    Posts: 74

    Paul F

    Well I’ve been super busy and My Rod is on the road...some minor tweaks, interior and re- paint are left...runs great, steers well...can’t complain...[​IMG]


    Sent from my iPhone using H.A.M.B.
     
  16. keywestjack
    Joined: Jul 14, 2013
    Posts: 96

    keywestjack
    ALLIANCE MEMBER
    from Pittsburgh

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.