Art & Inspiration The New Tag Toppers are in,The New Tag Toppers are in!

Got mine today. It's a thing of beauty!

 

Thanks to Hotrodprimer's post, I ordered 2 also and they came in quick. If I hadn't seen his post -may have missed out-Thanks again HRP

 

As a little inspiration for what you can do with your tag.
I couldn’t use it for the top of my plate so I found a spot on the rear bottom corner of my RPU ‘s bed.

 

I just picked up a couple from a hamber, probably a couple batches ago. Still just as excited as HRP...

 

That's a good one, Danny. Can I use it, too ?

 

got mine yesterday Thank You Ryan.

 

Ordered mine!!


Sent from my iPhone using The H.A.M.B. mobile app

 

Got mine today. A little Polish and Paint and it'll be ready to bolt on!!

 

Fabbed a couple of toppers for each side of the H.A.M.B. topper out of 3/16 aluminum, had polished both to a mirror. Didn’t like the result so hit them with Scott bright. Hope to make something better as these are not the best.


Sent from my iPhone using H.A.M.B.

 

Got mine...... filled with jewel like color.
I haven't figured out what the secret message is on the tab/tang near the top.?? I also notice numbers cast or stamped on the back side, ie: 12 and 19.

 

The message on the front is 'O'Brien' as they were produced by O'Brien Truckers.


Phil

 

Gotta be color coordinated!! Looks darker but came out of the same can, trust me!

 

HRP, What did you cut it off with??? Dremmel, a cut off tool, hacksaw ??? It has to be a clean cut to glue back on with JB weld...

 

I clamped mine to the bench and made the cut with a hack saw. Cleaned everything up on grinder and hand file. JB Weld and install.


Phil

 

New mount tab from aluminum sheet makes for a larger glue area like this:

 

A little polish, a little paint......

 

It would be killer if Ryan offered a hanging option like this HAMBER made, IMHO...sometimes they just look better on the bottom, IMHO

 

It's not a tag topper. Can't call it a bottomer.
It's a tag hanger.


Phil

 

The same color can look different on aluminum versus steel. Yours is just different enough it stands out and still ties in.

 

I've repainted mine twice now, red fades in months here, (hot summers)
I'll do it again, and put it on the tub.
Talented wife is going to do my new one for the F100 this time, bet it comes out perfect. Grrrrr....
No! I meant, "Thank you, Honey..."

 

Thanks, Phil... Did it just like you did before I saw your post... Just thought about it for a minute and it's the only logical and clean way to do it... Came out beautiful... 1st time I've used JB-weld and it seems like pretty good stuff, now I've got another tool in my box... thanks, man...

 

Finally put mine on after the paint dried, excuse the wire directly in this shot, lol

 

//uploads.tapatalk-cdn.com/20181015/27d9b0c97c3c084226d92ac1b00cffc7.jpg[/





Sent from my iPad using [url=http://r.tapatalk.com/byo?rid=77983]The H.A.M.B. mobile app[/url]

Got mine mounted too.

 

The pile-o-parts 32 sedan proudly wears one. It's the nicest part on it.