71 to 74 Mavericks measure around 52 - 53 inches. The 75 to 78 Mavericks measure around 65 - 57 inches. HRP
I'm sorry guys... knew that measurement. What I need is housing flange to flange measurement. Found a housing with no axles and I think it's Maverick, but can only tell if I have this dimension to compare.
I found one site that said 52'' to 53'' backing plate to backing plate. Not sure exactly where they measured from but this should be pretty close.
Measuring one thats still assembled, looks like about 51" housing flange to flange. With backing plates still on can't be more precise, sorry
Very helpful guys... thanks! I also saw the 52-53" measurement, but was looking for exact dimension, so I know for sure. The 51" measurement is about what I was thinking. Thanks again!
For what its worth, post 4 in this thread says 51-1/4", so I may have been pretty close. http://mmb.maverick.to/threads/another-9-inch-interchange-question.97692/
Just so you know, the 7.5 (1983-1992) and 8.8 (1990-1992) from a Ranger pickup is also 56-1/2" wide. Those can be found, stacked up like cord wood at most yards, in a variety of ratios, many with limited-slip differentials. Each is as strong, or stronger than an 8".