Vintage Mickey Thompson Speed Parts

Modified M/T Speed parts. This Cross Ram manifold was cut to run on a 4-cyl. Pontiac. Not sure when it was done, only saw it hanging on a friends wall.

 

Here are a set of four M/T Eliminator cast aluminum wheels.
These wheels are 15x6" with 4.25" small ford bolt pattern.
They have a nice chromed metal cap instead of cheap plastic caps.
Based on old magazine ads these were released around 1966-67.
-Andy

 

Sweet shit...

 

Awesome thread!

 

These almost look like a set of Fentons... Nice!...

 

You gotta be out of your freakin' mind!!!!...

 

Here's my vintage M/T stuff:

two 15 x 6 chrome slots & a pair of breathers

 

Naw, but I was to sell my pair........

 

Took this shot of all the styles of Pontiac covers since I'm one of a handful of people that can:

 

Now your just showing off! Good for you.

 

here's my front cover for my 392 I've been collecting parts for.

 

Not really a speed "part" but I've had this lighted sign for years and have never seen another or any info on any other dealer promo items from Mickey Thompson. Anyone else have any dealer promo items?

 

I am currently freshening up a 1963 327 cubic inch Chevrolet small block engine that has a set of Mickey Thompson Pistons installed in it. The pistons are domed shaped and look to be manufactured from aluminum. They have the following marks cast into them beneath the piston pin: MT-1, MICKEY THOMPSON, HA. Does anyone happen to have any information on these pistons? I believe the engine has been bored .060" over.

 

Mickey Thompson 10.00 X 15 "Challenger" Slicks Im guessing late 60's

 

NOS 455 Olds blower intake, http://www.ebay.com/itm/NOS-MICKEY-...ash=item3f517d10bd:g:28EAAOSwpDdU6RvK&vxp=mtr


Magnesium 427FE blower intake, http://www.ebay.com/itm/427-Ford-Ma...ash=item35fcfce974:g:1wIAAOSwSdZWcffy&vxp=mtr

 

Helping a friend sell his timing cover....

 

Magnesium small block Chevy covers from my collection with serial number /00

 

So cool!

 

Hi! Would you be interested in selling your M/T valve cover sign?

 

Would you be interested in selling your M/T valve covers?

 

Would you be intrested in buying any MT-12 pistons. I myself dont know what they fit but there new. Inherited them and an non mickey thompson intake with 3-2 on it dont know what its for either and an air cleaner for what i dont know either. If anyone has an idea on any of it. ,it would be greatly appreciated. Thanks

I have some mickey thompson piston new. MT-12. Would you be intrested? Call 707 655 1188 or text.

 

Looking for info on the stagger for the tubes into the collector for the Super Scavenger Headers. What I mean is what is the length in the collector of each exhaust tube and how do they conform to the firing order. So if your engines odd side is 1-3-5-7 would they extend into the collector (shortest to longest) in the same order and how far do each extend into the collector. Was their entry into the collector very from engine to engine. I know that he originally decided to make just the collector and sell them but determined that selling the completed header was better for quality control.

I am also looking for one of his stroker cranks used in the 215 Buick v8's as well as the limited factory produced dual quad manifolds that were supplied to him.

Thanks
Randall Black
OldeBuick

 

My 2 4barrel crossram MT for the big port 409.

 

I found this NOS pair of 392” covers in the original box at Hershey about 30 years ago. Had to give $100.00 for em:

 

Some of my stuff, too many valve covers so I'll hit the highlights

 

I am wondering about values of some magnesium M/T parts I may be selling. I have not been able to find any comps out there.
The set of three/four pieces.
Idler bracket with pulley, 38 tooth upper pulley and drive snout.
Any input would be helpful
Thank you

 

Some cast iron header blockoff plates...

 

I bought a set of M/T valve covers for my V8 Corvair. They were NOS still sealed in their GM parts box. It says Mickey Thompson on the inside of the valve cover

 

Nice! I had a single no logo M/T cover. Planned to make a racer, but someone else wanted it more than I did.