New Banger block in the works.

When?

.

 

The one in the machine now is almost finished. Yours is next!

Tod

 

Go Tod! Go!
-Dave

 

Here are some castings we just did. The dual plug heads are brand new. The dual plug had a sand wash issue as you can see, which will be eliminated by mold wash on the next attempt.

Tod

 

That looks great, but how are the blocks coming?

.

 

Snyder work in the way right now. We got screwed over by foundries so bad it isn't even funny. probably a year behind on his stuff. I am fitting time in on the first aluminum block when I can. It is almost ready to be sleeved.

Tod

 

Last thing you told me was that you had cut the bores wrong for the sleeves you had. you got new sleeves and a new cutter to solve the machining issue and all you had to do was re-cut the bores. That was April.
Patiently waiting.

.

 

You're deposit money will be returned asap.

Tod

 

Beautiful workmanship!

~ Carl

 

Nice work Tod. That dual plug head is badass

 

The B head water jacket sent off for 3D printing quote.

Tod

 

As a new banger owner, I'm avidly watching this thread!

 

Me too

 

Todd
The intake in the pic a few posts above, is that a stock updraft for Snyder's, or a 2 barrel downdraft? Hard to tell without seeing the flange. I am looking for a swept up manifold to fit between my drive shaft header pipes.

 

That is a downdraft.

Tod

 

If you are looking for any casting equipment
http://archive.perfectionmachinery.com/csb/Public/show/aeb0-vb2bs--iqncf-1x61hwe8

 

First 2 cores for the new B heads.

Tod

 

New batch of Thomas heads.

Tod

 

Sure would be nice as a "B"

 

B heads are next.

Tod

 

I hope the "B" heads are still going to be cast iron with the letter "C"on top.

Charlie Stephens

 

They will be.

Tod

 

Got 2 molds for the new B heads and test fit the jacket cores today. Hope to cast 2 in aluminum within a week.

Tod

 

Lookin good Tod
What’s the compression on these?

 

Around 6:1

Tod

 

any up dates???

 

a twin plug option would be good

 

Do you have any Winfield heads available Tod ?

 

No. I have about 15 to make right now.

Tod

 

I have a different twin plug head.

Tod