Technical 30 coupe on 32 frame

Don't chastise me for asking this, but has anyone built a full fendered model A coupe on 32 rails? I am wanting to build a open wheeled coupe, but once the sub rails have been cut & modified & welded in there is no easy going back. At this time the laws up here will let us have fender less antique cars, but if the laws were to some day change I was thinking that I could put fenders on it at that time. I know that this goes against the main reason for using the 32 frame, but was looking at my possible options. Not to knock anyone's likes/dislikes, I just don't care for the motorcycle front fenders & partial rear fender look. Does anyone have any pics or comments? Thanks. Bill

 

Hamber @Dyce is doing a fendered Roadster......oops I mean Coupster... on a 32 frame...I will get the link...and hes doing a fine job as well...

https://www.jalopyjournal.com/forum/threads/model-a-coupster-on-32-rails-updated.335443/

 

Stogy, Thanks for the link.

 

Any more? I can't believe no one else has done this.

 

A 30-31 can use everything '32
Ron White 1969

 

^^^^^^^
Ron's "Canadian" deuce, neat car.

 

Are you planning on using an original 32 frame or ordering a frame or rails ?

 

I will be ordering in rails. Thanks for the replies.

 

If you don't pinch the rails rails and align the body with the rear fenders all of the 32 fenders and running board will work. If you pinch the frame anywhere you'll have to modify the fenders and running boards.

 

I was not planning on pinching the rails.

 

https://www.jalopyjournal.com/forum/threads/full-fender-model-a-on-32-frame-feasible.231168/

 

'32 fenders or A fenders?

 

Thanks for the comments. I would use the 32 fenders & running boards. Frame will be bobbed in the rear & gas tank in trunk.