Register now to get rid of these ads!

Projects where do i go with this dash?

Discussion in 'Traditional Customs' started by thewishartkid, Apr 10, 2018.

  1. thewishartkid
    Joined: Jun 23, 2006
    Posts: 895

    thewishartkid
    Member

  2. Frankie47
    Joined: Dec 20, 2008
    Posts: 1,877

    Frankie47
    Member
    from omaha ne.

    would you care to elaborate.......your'e a little vague on the details.
     
  3. thewishartkid
    Joined: Jun 23, 2006
    Posts: 895

    thewishartkid
    Member

    I can't get an idea where the builder was going with this. All welded up with this console coming out of the middle of the dash.
     
  4. DdoubleD
    Joined: Nov 18, 2009
    Posts: 225

    DdoubleD
    Member
    from Michigan

    Clean your camera lens.
     

  5. doyoulikesleds
    Joined: Jul 12, 2014
    Posts: 306

    doyoulikesleds

    from what i can see most of it would go to the scrap yard. what car are you building and what is your final vision?
     
    Hnstray likes this.
  6. i bet he was going for something like this: Unknown-1.jpeg Unknown.jpeg
     
    ct1932ford likes this.
  7. 41rodderz
    Joined: Sep 27, 2010
    Posts: 6,540

    41rodderz
    Member
    from Oregon

  8. maneri
    Joined: Dec 8, 2009
    Posts: 242

    maneri
    Member
    from ohio

    time to start again --cut it out
     
    kadillackid and Hnstray like this.
  9. Remove that over sized waterfall coming out of the middle of the dash first, then give it another think.
     
    kadillackid and Hnstray like this.
  10. Some things look a lot better from a distance. I don't think you can get that far away.
    The Wizzard
     
    lakepipes, vtx1800, pat59 and 2 others like this.
  11. That rusted steel tongue sticking out of your dash has to go. The rest is pretty simple....cut holes in the driver's side, install gauges. Grab a glove box and door at u-pull-it and weld that sucker in the right side. Put switches in the middle. The end.
     
    vtx1800 likes this.
  12. miker98038
    Joined: Jan 24, 2011
    Posts: 1,143

    miker98038
    ALLIANCE MEMBER

    The builder was going someplace none of us want to go, obviously. I hope the steering wheel was a mock up too.
     
    lakepipes likes this.
  13. Bandit Billy
    Joined: Sep 16, 2014
    Posts: 12,287

    Bandit Billy
    ALLIANCE MEMBER

    I'd start by removing the console and dash connection piece. That is just nasty IMHO.
     
  14. Is that a Wrecking yard in the back ground? Might give you an idea of what the builder thought of what he had done.
    The Wizzard
     
  15. Cut out that center console and use the steel to patch the floor.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.