Features Fenderless Model A's, Show Us Your A-Frames!

This is my setup. 4" drop chassis engineering front axle, reverse eye spring in the front with 4:25/4:50-16's and a 6" Z in the back with the crossmember mounted below the frame for axle clearance since I run a spring behind setup with a reverse eye spring and 7:50-16 rear tires.

No channel, gonna do a 3" chop. 276" flathead, top loader and 3:54 banjo rear.

Cliff Ramsdell

 

Here's mine, bought it this way an Love it ! (I really gotta get it out an get some better pic's ! )

 

Got rusty bits cut out of my windshield frame and welded back. Cut/bent/welded my wonky cowl brace back sorta straight. Works for me!

 

Sent from my XT1254 using The H.A.M.B. mobile app

 

model A on original frame, less everything.........

 

1930 PU frame
Cadillac rear w/12” discs
Corvair front suspension w/S-10 2” dropped spindles and discs
Motor mnts setup for 327 SBC and 727 Torqueflite tranny.
Originally built when I was 17 years old in High School in 1971.
S-10 spindles and Caddy discs are the recent upgrade 45 years later


Sent from my iPhone using The H.A.M.B. mobile app

 

Stock just kicked a bit in the rear


Sent from my iPhone using The H.A.M.B. mobile app

 

^ ^ ^ That's perfect right there

 

I’ve owned this 28 coupe for 45 years, bought her for $150 when I was 15 years old......gotta to be the oldest project ever.

 

the @The37Kid has you beat......

 

Just went through this whole thread.....really like this sedan. Looks like it has a Rolling Bones style front spring behind the axle set up. I'm sure it was built before the RB's popularized that way of front end lowering though. Sure would like to see some chassis pic's.....including the rear suspension too.

 

This car is outrageous!

 

Through the years;

 

Yes, Found my '30 Roadster body in 1962 on the way home from church one Sunday. It was free for cleaning out the garage. That was the start of the project and my life as a flea market vendor, I was 12 year old at the time. Bob

 

29 roadster on an A frame and a 30 chassis that will be a coupe someday soon

Sent from my E6810 using The H.A.M.B. mobile app

 

You can see the frame on mine.

 

Very nice old school rod.

 

chop job- Thanks, it's bare bones for sure haha

 

My favorite one , to do my roadster 29 for sure, it's got all the look I'm wanting for this project... thanks...Don

 

Sent from my SM-J327P using The H.A.M.B. mobile app

 

My 30 Coupe under construction.

 

FMy '30 with a Chevy Banger n a glide.

 

Thank you I like that little car myself as I've had it now for over 52 years I think I'll go for a ride tomorrow

Sent from my SM-T560NU using The H.A.M.B. mobile app

 

Here's my '30 A-bone aka "Bonita". In all her unchopped glory The sbc is going to give way to a Ford engine later this year.

 

Just got back from having 3 inches taken out of the pillars

Sent from my Pixel XL using The H.A.M.B. mobile app

 

this car gives me a chubby. I need a coupe, BAD