Site Links Affiliated by SOVRN.
Register now to get rid of these ads!

Projects The "Arnett AV8 Roadster Build" @Dirtys Speed Shop

Discussion in 'Traditional Hot Rods' started by Rusty, Oct 13, 2017.

Page 1 of 5
  1. Rusty
    Joined: Mar 4, 2004
    Posts: 9,474
    Profile Page

    Rusty
    Member
    from Combine, Texas

    Been hard at getting this 28 roadster going for Mr Arnett, started as a stocker, that we wanted to keep as correct as something a high schooler of the 40's would of wanted or even a Race of Gentlemen would want now, using as much original parts as we could . I'll try to catch the build up to date

    Unsplit front 32 wishbones
    32 front dropped axle
    Flathead
    39 tranny and rearend

    Installing the f1 crossmember
    [​IMG]

    [​IMG]

    [​IMG]
    [​IMG]


    Sent from my iPhone using The H.A.M.B. mobile app
     
    Last edited: Oct 13, 2017
    Rusty, Oct 13, 2017
    SHARE POST#1
    1947knuck, glorydime, kiwijeff and 5 others like this.
  2. Rusty
    Joined: Mar 4, 2004
    Posts: 9,474
    Profile Page

    Rusty
    Member
    from Combine, Texas

    [​IMG]

    The rear small z and model t spring set up on the 39 ford rearend
    [​IMG]

    [​IMG]


    Sent from my iPhone using The H.A.M.B. mobile app
     
    Rusty, Oct 13, 2017
    SHARE POST#2
    Atwater Mike, 1947knuck, pecker head and 12 others like this.
  3. RuFFDaWG
    Joined: Jan 3, 2007
    Posts: 1,993
    Profile Page

    RuFFDaWG
    Member
    from Nowheresville, Oklahoma

    Very good start!
    Are you boxing the frame?
    What brakes?
    Keep us posted.................
     
    RuFFDaWG, Oct 13, 2017
    SHARE POST#3
  4. Rusty
    Joined: Mar 4, 2004
    Posts: 9,474
    Profile Page

    Rusty
    Member
    from Combine, Texas

    Rusty, Oct 13, 2017
    SHARE POST#4
    1947knuck, pecker head, glorydime and 6 others like this.

  5. Rusty
    Joined: Mar 4, 2004
    Posts: 9,474
    Profile Page

    Rusty
    Member
    from Combine, Texas

    Rusty, Oct 13, 2017
    SHARE POST#5
    1947knuck, brEad, barrnone50 and 7 others like this.
  6. tfeverfred
    Joined: Nov 11, 2006
    Posts: 15,791
    Profile Page

    tfeverfred
    Member Emeritus
    from Houston, Texas

    Looks great!
     
    tfeverfred, Oct 13, 2017
    SHARE POST#6
    Rusty likes this.
  7. stillrunners
    Joined: Aug 27, 2009
    Posts: 10,478
    Profile Page

    stillrunners
    Member
    from dallas
    1. Studebakers
    2. Early Hemi Tech
    3. 1955-1956 Plymouth Group

    Ohhh those rear shock mounts.....sweet utilization there.....work great work team Dirty !
     
    stillrunners, Oct 13, 2017
    SHARE POST#7
    pecker head, Jugornot and Rusty like this.
  8. Rusty
    Joined: Mar 4, 2004
    Posts: 9,474
    Profile Page

    Rusty
    Member
    from Combine, Texas

    Setting up the F1 pedals [​IMG]

    Turning down the f1 steering for the new flange to be welded on
    [​IMG]

    [​IMG]

    [​IMG]
    [​IMG]
    [​IMG]



    Sent from my iPhone using The H.A.M.B. mobile app
     
    Last edited: Oct 13, 2017
    Rusty, Oct 13, 2017
    SHARE POST#8
    1947knuck, brEad, Retroline and 7 others like this.
  9. Rusty
    Joined: Mar 4, 2004
    Posts: 9,474
    Profile Page

    Rusty
    Member
    from Combine, Texas

    Rusty, Oct 13, 2017
    SHARE POST#9
    1947knuck, BigO, brEad and 12 others like this.
  10. walter
    Joined: Nov 4, 2007
    Posts: 635
    Profile Page

    walter
    Member
    from wichita kansas

    Looking good! Brings back memories of a few years back. Keep up the great work!


    Sent from my iPhone using H.A.M.B.
     
    walter, Oct 13, 2017
    SHARE POST#10
    Rusty likes this.
  11. Rusty
    Joined: Mar 4, 2004
    Posts: 9,474
    Profile Page

    Rusty
    Member
    from Combine, Texas

    [​IMG]

    Some of the rust repairs
    [​IMG]

    Had some spare stock subrails that found a new home on this car
    [​IMG]


    Sent from my iPhone using The H.A.M.B. mobile app
     
    Rusty, Oct 13, 2017
    SHARE POST#11
    1947knuck, BigO, brEad and 4 others like this.
  12. Rusty
    Joined: Mar 4, 2004
    Posts: 9,474
    Profile Page

    Rusty
    Member
    from Combine, Texas

    [​IMG]

    Building the riser for the rear z area
    [​IMG]

    [​IMG]

    [​IMG]
    Whipped up a crossmember cover
    [​IMG]

    [​IMG]


    Sent from my iPhone using The H.A.M.B. mobile app
     
    Rusty, Oct 13, 2017
    SHARE POST#12
    1947knuck, BigO, brEad and 7 others like this.
  13. Rusty
    Joined: Mar 4, 2004
    Posts: 9,474
    Profile Page

    Rusty
    Member
    from Combine, Texas

    Rusty, Oct 13, 2017
    SHARE POST#13
    1947knuck, brEad, Retroline and 6 others like this.
  14. Rusty
    Joined: Mar 4, 2004
    Posts: 9,474
    Profile Page

    Rusty
    Member
    from Combine, Texas

    Rusty, Oct 13, 2017
    SHARE POST#14
    1947knuck, BigO, brEad and 11 others like this.
  15. Rusty
    Joined: Mar 4, 2004
    Posts: 9,474
    Profile Page

    Rusty
    Member
    from Combine, Texas

    Rusty, Oct 13, 2017
    SHARE POST#15
    1947knuck, pecker head, Stogy and 6 others like this.
  16. Rusty
    Joined: Mar 4, 2004
    Posts: 9,474
    Profile Page

    Rusty
    Member
    from Combine, Texas

    Rusty, Oct 13, 2017
    SHARE POST#16
    1947knuck, BigO, Stogy and 2 others like this.
  17. Rusty
    Joined: Mar 4, 2004
    Posts: 9,474
    Profile Page

    Rusty
    Member
    from Combine, Texas

    Rusty, Oct 13, 2017
    SHARE POST#17
    1947knuck, BigO, brEad and 7 others like this.
  18. Rusty
    Joined: Mar 4, 2004
    Posts: 9,474
    Profile Page

    Rusty
    Member
    from Combine, Texas

    No not boxing the frame, stock 40 brakes


    Sent from my iPhone using The H.A.M.B. mobile app
     
    Rusty, Oct 13, 2017
    SHARE POST#18
    Stogy likes this.
  19. 30tudor
    Joined: May 9, 2002
    Posts: 1,697
    Profile Page

    30tudor
    Member
    from salt lick oregon
    1. 60s Show Rods
    2. HAMB Old Farts' Club
    3. Holley 94 Group

    Thanks for all the build photos I always like to watch your stuff come together, nice style.
     
    30tudor, Oct 13, 2017
    SHARE POST#19
    Rusty likes this.
  20. teach'm
    Joined: May 8, 2005
    Posts: 319
    Profile Page

    teach'm
    Member
    from Tucson, AZ

    Looks great Rusty. Any plans for a belt driven fan?
     
    teach'm, Oct 14, 2017
    SHARE POST#20
  21. waxhead
    Joined: May 11, 2013
    Posts: 1,172
    Profile Page

    waxhead
    Member
    from West Oz

    WOW, off to a great start. Looking good. I am liking some of the finer details.
     
    waxhead, Oct 14, 2017
    SHARE POST#21
    Rusty likes this.
  22. wbrw32
    Joined: Oct 27, 2007
    Posts: 7,315
    Profile Page

    wbrw32
    Member
    from jefferson,tx
    1. HAMB Old Farts' Club
    2. Upholstery

    You always do good work,Rusty...I just noticed you are in a different building,Where is it??
    Say Hi to your pop for me.
     
    wbrw32, Oct 14, 2017
    SHARE POST#22
    Rusty likes this.
  23. Rusty
    Joined: Mar 4, 2004
    Posts: 9,474
    Profile Page

    Rusty
    Member
    from Combine, Texas

    Yes sir the fan is mounted to the generator


    Sent from my iPhone using The H.A.M.B. mobile app
     
    Rusty, Oct 14, 2017
    SHARE POST#23
  24. Rusty
    Joined: Mar 4, 2004
    Posts: 9,474
    Profile Page

    Rusty
    Member
    from Combine, Texas

    Hello Mr Wolcott, Yes sir expanded to the new shop at 200 W Elm st, Seagoville tx 75159


    Sent from my iPhone using The H.A.M.B. mobile app
     
    Rusty, Oct 14, 2017
    SHARE POST#24
    Stogy and kidcampbell71 like this.
  25. brady1929
    Joined: Sep 30, 2006
    Posts: 9,272
    Profile Page

    brady1929
    Member
    from Gilbert Arizona

    Great hot rod.
     
    brady1929, Oct 14, 2017
    SHARE POST#25
    Rusty likes this.
  26. Pete
    Joined: Mar 8, 2001
    Posts: 4,761
    Profile Page

    Pete
    Member
    from West of Boston, Ma, USA

    I like it, awesome fab work.
     
    Pete, Oct 14, 2017
    SHARE POST#26
    Rusty likes this.
  27. Rusty
    Joined: Mar 4, 2004
    Posts: 9,474
    Profile Page

    Rusty
    Member
    from Combine, Texas

    Rusty, Oct 14, 2017
    SHARE POST#27
  28. cactus1
    Joined: Apr 10, 2006
    Posts: 9,909
    Profile Page

    cactus1
    Member
    from Beautiful Kansas City! (And beyond!!)

    Looks great! Who is Mr. Arnette? The sunglasses guy?
     
    cactus1, Oct 15, 2017
    SHARE POST#28
    Rusty likes this.
  29. Rand Man
    Joined: Aug 23, 2004
    Posts: 4,872
    Profile Page

    Rand Man
    Member
    from Rogers, Arkansas

    Nice and traditional.


    Sent from my iPhone using H.A.M.B.
     
    Rand Man, Oct 15, 2017
    SHARE POST#29
    Rusty likes this.
  30. Hermanpullersgarage
    Joined: Sep 10, 2011
    Posts: 383
    Profile Page

    Hermanpullersgarage

    PURE HOT ROD!
     
    Hermanpullersgarage, Oct 15, 2017
    SHARE POST#30
    Stogy and Rusty like this.
Page 1 of 5

Share This Page

Register now to get rid of these ads!
Top

Archive

Support

Support The Jalopy Journal - Contact Us - Log In

Subscribe

By Email - RSS
-
Our Affiliate Link Policy

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.