Register now to get rid of these ads!
Auctions

1931 traditional Model A hotrod pickup

Discussion in 'Cars For Sale' started by joe1250esm, Aug 7, 2015.

  1. joe1250esm
    Joined: Jun 2, 2009
    Posts: 145

    joe1250esm
    Member
    from RI

    City: Cranston

    State: Rhode Island
    Price: 22500
    City: Cranston
    State: Rhode Island
    Price: $22,500 USD
    City: Cranston
    State: Rhode Island
    Price: $22,500 USD
    City: Cranston
    State: Rhode Island
    Price: $22,500 USD
    City: Cranston
    State: Rhode Island
    Price: $22,500 USD
    Up for sale is my 1931 Ford model A Hotrod truck. I built it as if I was a teen in the late 50s with 95% original or NOS parts

    Frame:

    1931 model A frame sand blasted and PORed

    1932 K member, brake and clutch pedals

    1932 ford heavy beam front axle straightened, maged, and dropped 4" with new bushings and king pins, drilled with 13 1" holes. Split 1934 wish bone

    1941 banjo rear end all rebuilt with new bearings, seals, and 3:25 Getz gears, shortened torque tube and wish bones

    1939 ford 3 speed top loader trans with new seals, bearings and synchronizes with 48 car gears

    1940 ford juice brakes with chromed and drilled front backing plates

    1948 ford copper radiator (new core and shortened)

    Original BLC guide lights

    F100 steering box with 1940 ford column

    1941 mercury steering wheel

    1939 ford wide 5 wheels

    New 7:50 -16 Firestone deluxe champion rear tires
    New 4:50-16 Firestone deluxe champion front runners

    Engine:

    1956 265" small block Chevrolet totally rebuilt with new bearings, seals, lifters, rockers, cam, pistons, rods, timing set, and oil pump

    Three Holley 94s (all three working)

    Vertex mag ( new points, coil, condenser, recharged magnets)

    30/30 comp cam

    .060 over bore

    12V AC Delco generator

    Center force clutch

    Made 295 hp at crank


    Body:

    Real 1931 model A sand blasted and acid primed, Chopped 4", Channeled 5", Hotrod flatz paint.. We spent a lot of time on body work

    Shortened after market bed with original model A tailgate. The cover over the bed is made from old oak pallets and lifts up on hinges with a storage bin to store a tool box or whatever you need to go for a nice trip

    1932 ford commercial grille shell

    Vinyl tuck and roll bench seat

    REAL Stewart Warner 2 5/8 race gauges.. oil pressure, water temp, vacum, and amps. 2 1/16 fuel pressure gauge

    THERE IS NO AC, SIDE OR REAR GLASS, NO HEAT, and NO POWER STEERING

    I have taken this truck on many 250 mile trips with no issues

    Please ask questions!
    No tire kickers

    Possible trade for 28/29 roadster and cash

    license plate and topper not included

    Thanks for looking

    Comes with tittle and bill of sale!!



    [​IMG][​IMG][​IMG]IMG]//uploads.tapatalk-cdn.com/20181230/cc02f249a47ba8be6717d30732475791.jpg[/IMG][​IMG][​IMG]
     

    Attached Files:

    Last edited: Dec 30, 2018
  2. joe1250esm
    Joined: Jun 2, 2009
    Posts: 145

    joe1250esm
    Member
    from RI

  3. joe1250esm
    Joined: Jun 2, 2009
    Posts: 145

    joe1250esm
    Member
    from RI

    Race of gentleman bump!!
     
  4. joe1250esm
    Joined: Jun 2, 2009
    Posts: 145

    joe1250esm
    Member
    from RI


  5. joe1250esm
    Joined: Jun 2, 2009
    Posts: 145

    joe1250esm
    Member
    from RI

  6. joe1250esm
    Joined: Jun 2, 2009
    Posts: 145

    joe1250esm
    Member
    from RI

  7. joe1250esm
    Joined: Jun 2, 2009
    Posts: 145

    joe1250esm
    Member
    from RI

    Needs a new home!! PM with offers
     
  8. joe1250esm
    Joined: Jun 2, 2009
    Posts: 145

    joe1250esm
    Member
    from RI

  9. joe1250esm
    Joined: Jun 2, 2009
    Posts: 145

    joe1250esm
    Member
    from RI

  10. joe1250esm
    Joined: Jun 2, 2009
    Posts: 145

    joe1250esm
    Member
    from RI

    Price drop 21,500
     
  11. joe1250esm
    Joined: Jun 2, 2009
    Posts: 145

    joe1250esm
    Member
    from RI

    Needs a new home..
     
  12. joe1250esm
    Joined: Jun 2, 2009
    Posts: 145

    joe1250esm
    Member
    from RI

    Been awhile since last bump.... Still for sale a LOT of STROKERS.... Needs a new driving buddy
     
  13. joe1250esm
    Joined: Jun 2, 2009
    Posts: 145

    joe1250esm
    Member
    from RI

    Still for sale way less then you can buy the parts and build it for !!!!


    Sent from my iPhone using The H.A.M.B. mobile app
     
  14. joe1250esm
    Joined: Jun 2, 2009
    Posts: 145

    joe1250esm
    Member
    from RI

    Scooterville and Scott Mannion like this.
  15. joe1250esm
    Joined: Jun 2, 2009
    Posts: 145

    joe1250esm
    Member
    from RI

    Must go ....


    Sent from my iPhone using H.A.M.B.
     
  16. joe1250esm
    Joined: Jun 2, 2009
    Posts: 145

    joe1250esm
    Member
    from RI

  17. joe1250esm
    Joined: Jun 2, 2009
    Posts: 145

    joe1250esm
    Member
    from RI

    Scott Mannion likes this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.