Technical does anyone have pics of radiator mounts 37-41 ?

I know the mounts vary year to year My 41 ford came with a Chrysler 22" wide flange mounted radiator. I was thinking of putting an aftermarket walker if i can, set up for sbc. I looked all over for pics I see the bottom mounts look to sit on the frame somewhere but I don't know where and not sure what else holds it in place. Any pics are appreciated

 

Standards and deluxes are different and you have to be more specific on the year.

Sent from my SM-G900P using The H.A.M.B. mobile app

 

its a standard long door 41 coupe

 

off a '41 chassis...
.

.

.

 

thanks for all the pics helps a lot

 

you are welcome.

 

If you dont' have mounts at all, Chassis Engineering has replacement mounts that weld in.

 

they're there, it was just with the oddball radiator in there I wasn't sure how the new one, when it comes would fit

 

My 41 has a walker rad and an sbc...on the walker rad there are flanges about 3.5" up from the bottom on the side that rest on the frame rails and a longer off set 45 degrees mount on the upper outside rail that mounts onto the inner fender aprons...dont have a pic installed but here is a pic of the rad and you can see the mounts on the right side.