Hot Rods Jerry 's 32 5 Window Project

That gas cap is kick ass. Nice one dude!

 

Valley cover cleaned up too and logo sanded off.


Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

Got the other side of the body sanded down. It's a slow and dirty job!


Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

Damn that's a great hot rod!

 

Then you chromed the body?


Sent from my iPhone using The H.A.M.B. mobile app

 

Got the cap on ....took some careful grinding and filing on the bottom to fit the radius on the quarter panel.

Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

Also got my tail lights on and a really cool license plate light that I found at a swap meet


Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

I also fabricated a push bar out of some stainless steel solid round. I'm not sure if I like it or not ...I made it so it is removable.. it fits into a sleeve that is attached to the rear crossmember.

Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

If I didn't say it before I must say now what a great build. The car's soul comes out in the pics more and more. You should be very proud of the build.


Sent from my iPhone using The H.A.M.B. mobile app

 

I like it but it's bigger than mine




Sent from my iPhone using The H.A.M.B. mobile app

 

Nice work with the gas cap. It's always the tiny details that make a good car into a great one.

 

Gas cap looks great.

 

I had a little bit of time today and I decided to start on the exhaust. I got a cool set of home made headers awhile back that were on Mike Mondrella's Caddy powered 32 coupe. I bolted them on the motor and cut up a 36 torque tube to use as exhaust extensions under the frame. I'm going to play with the angle that they peek out under the frame..but pretty neat so far I think



Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

I love seeing pictures of your car out in the sunlight!

 

I'm really loving those deck lid louvers. Such an awesome detail.

 

Love the exhaust...... Super cool build!

 

That exhaust looks cool!

 

Car looks sinister. Love the details.


Sent from my iPhone using The H.A.M.B. mobile app

 

Whipped up a headlight bar this morning using a pair of stainless stains and some solid stainless rod


Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

Part of me wants to chrome that oil filter, part of me doesn't want the flaked off chrome floating around in your engine.....

 

I've got something cool to swap it out for when it comes time to clean up the motor and assemble the top end

Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

Finished up the exhaust, tweaked and finish welded the headlight bar, mounted a pair of headlights to take a peek


Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

Seat riser mock up today


Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

Hey Jerry...hope all is well. Hows the project coming along? There is a bunch of pics with x's on them. The X's start on page 9. Anyhow BTTT it goes...

 

Just checking in on the progress. Looks awesome.

 

I've spent the past few weeks getting my Roadster ready for the race of gentlemen Wildwood. Had a blast and I'll be back on the project in the next week or so and will be updating

Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app

 

Sent from my SAMSUNG-SM-G891A using The H.A.M.B. mobile app