I wasdo going over the thread again and started thinking that you could probably use the stock Pontiac box and most of the steering linkage and run a cross steer drag link to the passenger side of the Chev axle. You would have to do some work on the tie rod. Possibly swapping to later style tie rod ends and use a Jeep CJ tie rod end on the passenger side to connect the drag link. The end I was thinking of looks like this one. https://www.summitracing.com/parts/...rts/cwa-j0918257/overview/make/jeep/model/cj7
Hope to get some time this winter to make some progress. Always too many irons in the fire. Sent from my iPhone using H.A.M.B.
My! How time flies.......A year and a half has slipped by.....you got off to great start....so clever how panels were redeployed.....don’t give up.....it is Great project. Ray