For those who would like a floor shift 4 speed for their flathead mopar, and/or a cheaper alternative to the hard to find 1950's or earlier overdrives, we have conversion kits that allow you to hook up a A833 4 speed overdrive to a stock Mopar flathead bell housing. They are in stock right now and they are $140 USD each (adapter plate and bolts) shipped anywhere in the Continental United States. Addional adapter plate would be $125 USD each and all go in the same box, so you save the shipping on the additional plates by a combined shipment. We got them in this week and have already started shipping adapter plate to those who were on a waiting list. Thanks to those who have been patiently waiting For further details on the conversion: Here is my blog entry on the process http://p15-d24.com/blog/17/entry-91...erdrive-with-a-floor-shift-using-mopar-parts/
We had so many inquiries about making an adapter plate for pickups, that we now have a 2nd Adapter plate that will work for the 2wd truck bell housing with the floor shift heavy 3 speed, light 4 speed or heavier 4 speed transmission. Bellow is the new Adapter. Then a picture of the car Adapter plate and Truck Adapter plate, and then a picture of the two truck bell housings. Bottom line: In the continental United States truck adapter plates are $150 shipped which is $135 and $15 for shipping The update on my blog - http://p15-d24.com/blogs/entry/102-...ve-on-most-mopar-flathead-cars-ready-to-ship/