Your wife doesn't have to know! Pictures tell most of the story. What you see is what you get. There is no frame, chassis, title or additional parts not shown included with this sale. Up for sale is a 1928/29 Ford Model A Tudor sedan body project. Project is currently completely disassembled. It will fit easily into the back of a truck. In my garage this takes up very little floor space. All of the pieces together only take up a space about 3' X 6'. Here's what you get, if you don't see it- I don't have it. Cowl is pretty nice and solid. Subrail extensions are decent. Inside of gas tank has been cut out. Top of gas tank is nice. Firewall very nice. No broken bolts in hinges. Minor, normal rot in bottom of cowl passenger side. Driver's side pretty nice with very little rust. Comes with two rear quarter panels for each side. There rare a total of FOUR. Typical rust, rot and bullet holes you normally find in parts these age. Passenger side quarters are nicer than driver's side. Between all four quarter panels someone should be able to put something decent together that should work. Majority of side subrails still on bottom of one pair of quarters. Rear panel a little banged up but all there. Has bullet holes. Doors: Driver's door: pretty rough, bashed in a little. Bullet holes. Part of top of window frame cut off. Inner structure looks all there and pretty solid/ straight. Passenger door: fair- significantly better than driver's door. There is some rust out along bottom in corners but not terrible- patch panels readily available. Front part of window surround cut. Comes with windshield frame. Stores/ transports easily. Everything pictures takes up only 3 X 6' space. Conveniently located in Minneapolis for easy pick up. If you are reading this, it's still for sale. Offers accepted upon arrival for inspection/purchase. First come, first served. $600- NOW $550!!! PM if interested. Thanks for looking. Have more photos but am having trouble uploading them now.