Technical How to split a 9" traction lock

what do I need to do to separate the two halves?
I remove the two screws

 

Does this help?

shagged from a google image search...

 

read the manual?

http://selectric.org/manuals/rearend/indexford.html

 

First in the series. I followed this and ended up with a perfect pattern first try.

 

A dead blow hammer and wrap it on the end you have sticking up in several directions that should loosen it up. Then just worry it apart. That is how I get 'em apart.

 

Thanks Squirrel.
I tapped the pin and that popped it apart.

 

I didn't read the manual again, I just posted the link, but I figured the roll pin was probably most of what was holding it together. It's been 25 or so years since I worked on one.