Hot Rods Looking for 32 wishbone yoke

I have been looking for a 32 wishbone, but price and availability are holding me back on my project. Does anyone have a yoke that was cut off when splitting their wishbone? Making the bones is fairly easy, but I have not settled on a good idea for making the yoke. If I could find one I would just make my own wishbone.

Thanks,

 

How much different are they from an A one? Could you modify it to work? I have one from when I split the wishbones on my coupe.

 

There are two different A yokes, the later one looks just like the 32-34, aside from the slight arc, the 32-34 is flat. You can leave the arc in, it may help with your mounting/clearance, or heat it up and press it flat.

 

b

 

They appear to be close enough for me. I dont suppose you have a pic of it do you?

 

I can get a picture later for you. I am at work but can stop by the shop on the way home. I also didn't realize there was a difference in 28-29 and 30-31 wishbones. Good information to know.

 

Early model A yoke is smooth on one side and cupped on the other. The later is like the 32-34 yoke except it has an arc. The chrome bone pic is a 34.

 

Here are a couple shots I took of the A one I have.

 

There is/was one in the HAMB classified section last week. May be mixed in with a "parts" listing, may not show in a search. Bob

 

I will take a look
Thanks

 

I found one a couple of months ago on the HAMB.
Placed a wanted ad on here and the Fordbarn.

 

I ended up find one up in Utah, turns out my brother had one, so I will be getting it shipped down here in just a wee while.
Thanks for the help, and the education on what I was looking for, it was most helpful.