Customs 1954 chevy car front seat bracket

The bracket for the front mount on the front seat for a 1954 chevy car. I have a 53 and a 54 here and no brackets to be found. If you have one or a pic I would love to see what they look like.

 

Im this close to being finished with the interior. HELP

 

If it's a loop with two holes in it look at the one for the tri 5

 

I didnt know if the 55 piece would fit, because I don't know what the original one for the 54 looked like.

 

I'll look in a few boxes this morning and see if I can find mine and get a picture . Or measure the floor and seat then you can figure out if the newer ones work.

 

By the way, good looking interior, is it a kit or made.

 

This is a '53. Different left and right, I believe this is a right. The holes are 3 & 3/16ths apart, and the step is 5/8" and 7/8" respectively. The strap itself is 1" wide.

 

Tri 5 looks much the same but is not stepped.

 

With those dimentions you could knock one out of strap steel.

 

My wife did the interior. Here are some more pics
Thanks for the info I can make a set now.