Looking for a reputable hot rod shop in the Philadelphia area.

I need some chassis work done to my 30 ford pickup that is outside of my experience or abilities. Does anyone know of a shop or someone for hire in the Philadelphia / Buck Co. area. Thanks in advance.


Posted using the Full Custom H.A.M.B. App!

 

I know a guy named Koz here on the HAMB was doing some work, a friend told me about him and he gave a good recommendation.

 

http://www.blastfromthepastcas.com/ http://www.eastcoastchevy.com/ Pete

 

Check with Flop Customs. He may know a guy. He's around the philly area, I believe.


Posted using the Full Custom H.A.M.B. App!

 

Flop is located in Pittsburgh but he might know someone.

 

Not as close as Buck County, but Six Deuces Speed Shop in Milford, DE is really good.

 

Thanks for the replies you guys. I'm going to check these out. Thanks again.


Posted using the Full Custom H.A.M.B. App!

 

Dick Robinson in the Willow Grove area- his focus is solid axle Corvettes, but also does traditional-style work.

 

Check out Todd at Flames Unlimited in Reading, PA. 610-921-8990 He should be able to help you out.

 

Another vote for Flop Custom.

 

Second vote for Blast From The Past, give them a call. 610-327-4366

 

Low buck boz in south jersey dose chassis fab...

 

If you haven't already found someone, there is Reutters in Lansdale.
http://www.reuttersrestoration.com/?page_id=21

 

In addition to Koz and Flames Unlimited in our area , I'd look into EJ Kowalski's shop in the Reading, PA area. He's top notch. Don't have his contact info handy, but you should be able to find it quickly enough .

Also heard Blast from the Past recently closed up shop ? Old man retired or something ?

 

New Address is 405 Keystone Blvd. Pottstown Pa. Son and Daughter took over, Pop retired and works there. (I have not been to new place) Pete