Hot Rods Rajah plug ends

I used to use the Rajah spark plug ends on my gasser in the 60's, and always wondered where the name came from and where they were made

Maybe it was the fellow's name who designed & made them?

G Don

 

I still have a set with Accel yellow wires. They were nice to allow any angle around headers. I have no idea where they came from.

 

I had the black Packard 440 wire, plus they had 2 little spring clips that held them onto the plug end so they did not fall off

 

Still around, in case anyone is looking:

http://www.thehotrodcompany.com/shopnow/show_dept.asp?dept_id=66&filterkey=bsp

Click on Show All at the bottom, and scroll down.

 

Or from the guys who make them today
http://www.westwoodproducts.com/rajah_terminals_E31.htm

 

you can add Speedway also for a source

 

You can get the ends and the Packard 440 wire from The Brillman Co.https://www.brillman.com/