Technical Throw out arm ball stud clip

I'm putting my clutch back together on my 47 fleetline. I can't figure out where this clip goes.
https://www.chevsofthe40s.com/detail/6227/Chevrolet_Throwout_Arm_To_Ball_Stud_Clip.html

Any help? Maybe I gotta find an inliners thread.

Thanks in advance.

 

at the pivot, where it fits over the ball. 0.796 spring, fits into the fork

 

it goes into the fork? I need to look closer, I don't see where the spring can be put into the fork.

 

Yeah, there's a groove cut into the ball socket in the throwout fork. It takes a pair of needle nose pliars to squeeze the clip to fit it into it's groove. I've done it by prying it into place with a screw driver but also lost one when it took flight.

 

this is a different fork design, but shows how it fits in the groove

 

ok, I get the idea. Once i put that spring clip in there it will help grab onto the stud?

Thanks for the info