HI,I have a rotary lift-spoa 88 7000#.I am trying to get one of the cylinders out.I have removed all that I can see.Cylinder will move up and down about 6 inches and spin around.I'm sure I've missed something.I need some help please.
Not familiar with your lift, but will give you a bump. Are you trying to remove cylinder from frame, or rod from the cylinder?
What have you done to get it out? I have a SP-084 and raised the lift all the way up, as high as it could go, and clamped the carriage up. Then I lowered the cylinder with the down lever, removed the piping, and the cylinder comes right out.