Register now to get rid of these ads!

Projects my new toy... 54 crestline

Discussion in 'The Hokey Ass Message Board' started by CHARLIE_HUSTLE, Jun 14, 2014.

  1. CHARLIE_HUSTLE
    Joined: Jul 18, 2009
    Posts: 117

    CHARLIE_HUSTLE
    Member
    from CHICO CA.

    just picked up my "new to me" 1954 crestline the day before yesterday. trying to ID the stock 2bbl carb. cant seem to find a replacement number for it anywhere on the internet. ordering new lakes for it today along with spider caps & skirts. going down a few more inches on my next day off.off to buy a roll of angel hair after work today. 10415562_1516051295280942_2057960443873953689_n.jpg 10415562_1516051295280942_2057960443873953689_n.jpg 10463055_1516026981950040_70464573734499662_n.jpg it has a rebuilt 239 already ,30 on the tree with overdrive, clean body & paint, tuck & roll interior already done. got a bit of work to go to make her look the way i want but i think i scored for $4,000.- delivered to my door.....
     

    Attached Files:

    rebarsfords likes this.
  2. Mr48chev
    Joined: Dec 28, 2007
    Posts: 33,984

    Mr48chev
    ALLIANCE MEMBER

    I wouldn't do anything except lower it a couple of inches front and rear and go cruising. Maybe add a set of more custom looking hub caps but on those more doors the less you change the better they look.
     
    fuzzybear likes this.
  3. CHARLIE_HUSTLE
    Joined: Jul 18, 2009
    Posts: 117

    CHARLIE_HUSTLE
    Member
    from CHICO CA.

    everything I'm doing is just small stuff...

    Sent from my HTCONE using H.A.M.B. mobile app
     
  4. Instead of spiders pop the center caps out and run some bullets, lower it, get some wide whites... Your Rollin
     

  5. missysdad1
    Joined: Dec 9, 2008
    Posts: 3,306

    missysdad1
    Member

    A lot of wisdom here. It's really easy to ruin a really nice car by adding gee-gaws to it instead of enhancing the original styling by lowering it and leaving the rest of it the heck alone. Just my $.02.
     
  6. rebarsfords
    Joined: Feb 17, 2004
    Posts: 477

    rebarsfords
    Member

    That's a beauty! Just lowering it a bit is gonna change the looks. Very nice!
     
  7. i just finished installing a borgeson power steering to one
     
  8. JeffB2
    Joined: Dec 18, 2006
    Posts: 9,503

    JeffB2
    Member
    from Phoenix,AZ

  9. Stock carb is gonna be an ebu Holley "94." Love 54 fords! I would say you bought it right. 239s aren't the best engines though, and if it's been pulled and "rebuilt" you might check your casting numbers. The best things I've done to my car is swap in a 292 and swap in an overdrive. The stock overdrive trans is tough to beat in terms of reliability


    Posted using the Full Custom H.A.M.B. App!
     
  10. CHARLIE_HUSTLE
    Joined: Jul 18, 2009
    Posts: 117

    CHARLIE_HUSTLE
    Member
    from CHICO CA.

  11. nice and clean
     
  12. I think you know what Jeff was talking about,there are a lot of Knowledgeable guys there and they can answer a host of questions.

    IMHO,you got a really good deal on a clean car,,do simple modifications,lower it,a set of white walls,but please forget the angel hair!o_O HRP
     
  13. greaser 35
    Joined: Feb 15, 2010
    Posts: 829

    greaser 35
    Member
    from FRANCE

  14. Bcometfx
    Joined: Oct 15, 2008
    Posts: 155

    Bcometfx
    Member
    from NC Indiana

    Great find. Love the more doors. Here is a pic of a buddy's.
    ImageUploadedByH.A.M.B.1403048229.729243.jpg


    Posted using the Full Custom H.A.M.B. App!
     
  15. jhtdon
    Joined: May 29, 2012
    Posts: 112

    jhtdon
    Member
    from Florida

    Hip Hip Hooray! Another music making Y Block. Hope you enjoy it for many sweet drives.
     
  16. ss34coupe
    Joined: May 13, 2007
    Posts: 4,239

    ss34coupe
    Member

    Cool car, and a good buy for you. Looks good just as it is to me.
     
  17. CHARLIE_HUSTLE
    Joined: Jul 18, 2009
    Posts: 117

    CHARLIE_HUSTLE
    Member
    from CHICO CA.

    Installed a new stereo , some dummy spots , pulled the hubcaps & put on some ribbed beauty rings. Next will be a few inches of drop & a set of skirts. Trying to find the push through bullet caps for the wheels. Problem is , my centers are 2.5"... Can't find them anywhere in that size anymore. Don't want to grind out the wheels either, & would like to avoid the cost of spider caps right now. Other than that , I'm replacing the starter tomorrow morning & trying to decide between lake pipes or bellflower tips...

    Posted using the Full Custom H.A.M.B. App!
     
  18. fishnuts.
    Joined: Mar 9, 2013
    Posts: 41

    fishnuts.
    Member
    from wisconsin

    My opinion, lake pipes look better on two door. Good looking car though, even better price you paid.

    Posted using the Full Custom H.A.M.B. App!
     
  19. CHARLIE_HUSTLE
    Joined: Jul 18, 2009
    Posts: 117

    CHARLIE_HUSTLE
    Member
    from CHICO CA.

    Posted using the Full Custom H.A.M.B. App!
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.