The Jalopy Journal
Weekend 3 of putting stuff together. Not bad. Waiting on some 32 spindles to come in the mail. Plan is to chop it about 5” [ATTACH] [ATTACH]
Decent day. Got the engine and trans together and in the frame. Bolted the intake and carbs on cause I couldn’t help myself. [ATTACH]
Thanks guys
In my mind, I’m thinking 32 spring perches with an extension bolted and welded. We’ll see once I get all the parts.
Got it….And hopefully last question I assume the fork should be contacting hub on the flat area and I either have mix matched parts or I’ll need...
I feel stupid that it was on backwards. I really need to get some manuals. Thanks for the help.
Little late, but checkin in. Started throwing a car together after too much other stuff has gotten in the way. A frame stepped in the rear, T...
Do I have the wrong one? Or is there a mix/matched part here? [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
If you can weld, it wouldn’t be too hard to make a custom length/shape throttle arm like the one you posted....
Question for people smarter than me.. What is this opening in the Snyders 5.5 head? Also, why do they recommend the B gasket on the A? As far as I...
Not really what I wanted to hear, but looks like I’ll need to consider my options. Thanks for the help.
I have one of Jim’s heads as well and the gasket fits much better on that head. Fits the block perfectly. Thinking the piston relief is slightly...
Would you say using a copper gasket and trimming would be my only option here? Doesn’t look like my graphite one is going to work. [ATTACH] [ATTACH]
Thanks for the help [ATTACH]
Separate names with a comma.