The Jalopy Journal
No. But you can leave that one on there. 53 and 54's use side mounts. 261s were cast with the 53-54 side mounts and then the later 55-63 style...
Thanks for all your effort. This is a great resorse for us Stovebolt nuts. Love the 12 port stuff and supercharger setups.
I have not driven my fenderless car for a few years but did get hasseled a bit when I did. We had a crankey old CVSE guy where I am over in the...
http://m131.photobucket.com/albumview/albums/Unsafe6/dscf0964.jpg.html?o=389 Here's how I do them.
Wow I was wondering if the equipment would end up with someone that could start producing them again. Pleas keep us posted on developments. this...
I used Hot Heads adapter to a Th400 nice quality piece. I was disapointed in my 354 and wish I'd kept with a 392.
Sounds like theres a few guys that replied here have really drove these things and know there combos. Ive built about a dozen of these motors with...
Your about as low as your going to get without dropped uprights or steped lower control arms. Good post here....
Ya I was suprised. It will pull most mountain passes here at about 55mph with the foot on the floor. I usually stick it in second early and keep...
My 54 has mildly built 235 single carb split exhaust,61 car 3spd. I run a 70 Nova 10 bolt with 2.73s in it. The motors pretty torquey so its OK...
I had a similar problem once on a O/T engine. Turned out to be a tiny leak sucking air in the pick up tube. The oil was aireateing slightly and...
Built lots of these, my favorite! bore it big as you need too with the original style flatops, L-79 blueprint series cam, 1.94" camel humps with...
Like R Pope said, grease gun hoses work killer and come in all kinds of lenghts.
Jesse was a long time member on the Flat Black Board. There was a post about this car he put on there with all his ideas. Most were very on the...
Hey BCT we could always share my DCOE Webers, one for you one for me:)
Separate names with a comma.
The Jalopy Journal