The Jalopy Journal
For some reason HAMB wont let me upload a .dxf file only a zip version. I can e-mail it direct to you if you want.
Just to let every one know the .dxf file that is posted is not a press fit type of cylinder girdle. This is designed to fit into the top of the...
If installed in equipment double check the firing order as mentioned, distributor rotation, and proper cylinder numbers, I've had forklifts that...
The problem starts with the bodies being wider and slightly longer at the top than at the belt line when you remove material things don't line up...
I picked up the Eastwood one a few years ago, The drums form Amazon fit fine they are slightly larger and come close to rubbing on the guard but...
My guess would be an AC compressor bracket for who knows what.
Here is a screen shot of the .dxf file opened in Sheet Cam[ATTACH]
My plan is to get it tacked in place about .020 above the deck then use a die grinder to V out the weld area jumping around with short welds. 8...
You need a program that can open it. I use Sheet Cam to convert .dxf files to g-code for my plasma table, there are a bunch of free .dxf viewer...
Pretty happy with how this came out, it will need a little cleanup on the block to fit in place as I didn't draw in the lumps on the sides of the...
I want to check the fit when I get home tonight, This is set up to be welded in so not a super tight fit. Send Cut Send looks to be a real good...
After screwing around with the local laser guy since Dec. I saw our fearless leader Ryan posted a article on his other site Garage Journal about...
Not sure but I think Mercruiser accomplished the same thing by cutting a grove in the deck between the cylinders. At least on the block I have has...
Nice how was this done?
Cast these a while back for the Cad 500 going in the Model A [ATTACH] [ATTACH]
Separate names with a comma.