The Jalopy Journal
Yes I think I got it. Your help is appreciated. As far as the gas tank goes, the flange/seam of the gas tank sits tight to the bottom side of the...
No thoughts? Posted using the Full Custom H.A.M.B. App!
Oops. Here's a pic [ATTACH] Posted using the Full Custom H.A.M.B. App!
Excuse my krude mock up. Hahaha. This it the crossmember I removed. I want to eliminate both of these. Mostly for aesthetics. And maybe alittle...
I had to remove the farthest rear crossmember to fit a jeep gas tank between the rear frame rails. The other one was not much of a cross member...
my old thread won t let me post so here it goes. Building a 51 dodge of a dakota frame that i shortened. The dakota frame had some heavy scale...
Here we go again, Finally back on the truck going on the 3rd winter. Ive been extremely busy with work and school and finally I am red seal...
I might add... these parts are hard to come by in my area.
Me and a friend stumbled across a trailer while of looking for old cars. I looked under to see a banjo rear end. Looks bigger than a model A for...
hey !! I'll admit it been slow. I haven't been working very much so funds are low, VERY low. lol Still... I ve been getting lots of small things...
Does anyone have a part number for a rad that will fit these, maybe those champion ebay rads.
I did chose the cherokee commache style tank because the location of the sending unit/filler neck. sending unit is facing forward towards the...
I'll elaborate, I was not including the flange in my measurments. the flange would end up sitting flat/flush on the bottom side of the frame rail....
Separate names with a comma.
The Jalopy Journal