The Jalopy Journal
Ok! Here’s the rig in question! No ballast in sight, pretty sure it was a fresh wiring job. Would like to test the coil out put some how....
I would like to rule out ignition. The system has some nice components (not saying fancy works great out of the box, I know it doesn’t). We just...
Your car sounds great! Would be pumped if this one ran half as good! If you get a chance, would be great to see what you have for carb settings,...
I am all for simplifying things with one carb but the style points aren’t there which Is a deal breaker for my pal. The carbs are 500cfm 1803...
I will work on a video next time I tinker with it. Earlier today we had a minute and swapped to the lighter springs in the distributor and was...
We did try one at a time and the performance was significantly worse, was before the wideband however. As for linkage, seems you can only adjust...
That’s the second time I have heard 2500 for all in, will investigate first thing in the morning. As for jetting the front carb had 89 primaries...
Nailhead Jason, would be premium if you could make that happen! Be nice to stop chasing my tail on jets and rods! Thanks in advance. And as for...
Well that would be most unfortunate. Will try to maximize performance with what he has. Thanks for the input.
Compression is 9.6:1 with GM fast burn aluminum heads, 62cc chambers. The coil is an MSD HVC blaster 2. Distributor is msd as well. Didn’t try...
I am unsure of stall speed, likely just a fresh T350 with a kit. Confirmed 3.50 gears, rotated tire twice and saw about 3 1/2 rotations of the...
Have tried both progressive linkage and 1:1, both were excessively rich. And as for the tuning kits and instructions have tried multiple tuning...
Hi all! finally registered for the HAMB, have lurked and fixed most of the issues I encounter just through searching, however totally stumped on...
Separate names with a comma.
The Jalopy Journal