The Jalopy Journal
Little back story before I get into the nitty gritty, had this distributor rebuilt by a somewhat local guy that's pretty good, adamant about using...
I've been revamping my 41 over the last 3 yrs, bigger blower, bigger carbs, bigger fuel system from one end to the other, moved the alternator,...
I POR 15'd my Henry J frame couple years ago, did all the recommended prep, put on 2 coats and it laid out smooth. [ATTACH][ATTACH] I moved a...
I have this intake and the two rear corners at the water passageway in the heads are really corroded bad. It's deep to the point I'm leery to...
Man, who ever was checking the boxes on this order form knew what the heck was going on ! Wife probably yelling to get rid of the hot rod and get...
On sale for $205, that's a $500 dollar savings, get them while you can !...
I know which way I'm leaning today, but tomorrow may be a different story. The photo of lights on behind grill is not adjusted, just duct taped...
I bought a torch set from the family of a deceased club member a few years back. Now it's time to buy some new hoses and a much needed rosebud but...
What years were they produced ? I've seen a bunch of aluminum but don't recall magnesium, 15x8 Chevy pattern. [ATTACH]
[ATTACH] I haven't even gotten it here yet but I'm pretty excited to get into another 55-59 task force truck ! The only other 57 I've owned was a...
A couple videos debunking the myths of "You can't run two 600cfm carbs on a 350" or "You have to run progressive linkage on dual fours" and "You...
I want to remove this Corvair ignition switch to reuse in another vehicle. I vaguely remember reading somewhere you need a key, which I do not...
Separate names with a comma.