The Jalopy Journal
Danny does your unit have the separate temp switch on the the evap housing (see troubleshooting chart) the come shipped with it set for cool. we...
as long as there are young men like you the heart of hot rods/customs continues to beat best of luck Boden Tom
roothawg has a thread on here 35-36 ford truck info for the masses check that out or he will probably chime in later Tom
neat old shoebox will make a nice cruiser. now not trying to rain on you parade,BUT before you get to deep try to get your paperwork squared away....
the compressor is kicking on but cant get it to pull vacuum or accept Freon. I replaced the evaporator and the hoses from the drier to evap and...
I am putting a/c in my 41 ford p/u. the vintage air evaporator housing was cracked so I am using an under dash much like the old mark 1V unit the...
there should be a shutoff valve somewhere in the system. I would trace both heater hose back to where they begin Tom
even tho I am a sbc man, there is nothing like the sound of a well tuned y-block . You should be proud Tom
thank you for descriptive diagram I searched google but nothing that clear came up Tom
1941 ford p/u sbc installing a N.O.S deal installed heater . the question is does valve go in hose from w/p or intake and which hose goes to top...
I don't know if it is my server or what but all I see are black x frustrating cause I love 40 fords Tom
if you install the 327 you are not wanna flip it IMHO Tom
1941 was first year for the 6cyl hence different front crossmember, if your gastank was inside cab then your cab is 42 through 47 Tom
Separate names with a comma.
The Jalopy Journal