The Jalopy Journal
If this guys getting paid for that kind of crap I need to start building cars for other people. I don't consider myself a good welder but...
Use silicon spray, slide the boot on first twisting it while you slide it on a couple inches past the end. Cut the wire and add the 90 degree...
a recently found pic of my dads drag car from 1970. Keystone Raceway in Pa.
Drivers side of the block will be stamped behind the starter and above the soft-plugs. It will say 340 or 360. Passenger side behind the motor...
273-318-340 pre 71 is what you need. These are cast iron, not aluminum and will change the lower radiator hose to the drivers side. You will also...
Usually about 5 or 6 Benjamins!
These are 3 1/2" front Fenton gyro's. I guess they are similar...
Build what YOU want to build! Don't worry about what someone else wants...trust me..
Now that I re-read your post is the Alternator wire attached in the system at the some place as the starter? I just had the same problem in the...
I used the Ford solenoid and it makes everything easier. The positive lead runs from the battery to the solenoid and from the opposite side of the...
If the 400 and the 361 both have 727's behind them you can make this work by simply using the 400 torque converter. ;)
I picked up this 65 Coronet 2 dr H/T back in October to begin an altered wheelbase car. After a couple weeks of sanding, grinding, and stripping...
Separate names with a comma.
The Jalopy Journal