The Jalopy Journal
Thanks for everyone help. I got it. the hinges are bent. With a little bit of tweaking I got it straight or even depending on how you look at it...
Just ordered my glass stretcher off amazon. JK. I did a very mild chop the glass will not be a issue.
Thanks. Im going to get back out there and will let yawl no the verdict.
Heres one its straight. [ATTACH]
The relief cuts are at the same with after pulling pillars to match the lower part.
Yes everything is braced. No the door never closed to smooth to begin with. No window installed do to glass needing to be cut. The vertical cut in...
I also check the degrees of the pillars and they're both at the exact same degrees and everything
Sent from my SAMSUNG-SM-G930A using The...
Yeah I wasn't thinking about the alignment of the door. And once I got to the pillar then I noticed it was out of alignment
Sent from my...
Yes just the pillar part
Sent from my SAMSUNG-SM-G930A using The H.A.M.B. mobile app
Here is the passenger[ATTACH] side.
Yes exactly. I did only a 2" chop in front and 2.5 in the back. very mild. I'm think maybe the hinge is sprung maybe?
No no pulling it in. the passenger side went together no problem. This door has been missed aligned from day one.
Its not the gap from the door to the fender its were the window frame meets the a pillar. First picture shows it best.
Any help with door gap or suggestions would be great. My driver side door I cant seem to get the top part of the front of the door to line up with...
Separate names with a comma.