The Jalopy Journal
We cleaned out the inside and removed the hood, fenders, etc. Not much floor left, or rockers, but we'll take care of that. Will need a trunk...
I'll keep that in mind, that will come later. Thanks
It's been lurking in the corner for a few years, my son keeps asking when we'll start on it. I keep saying "maybe in the winter" since we stay...
I've been using an 8N for the last few years with a 5' finishing mower to maintain about 5 acres. Generally its been pretty bulletproof. I had...
I see the SK prefix on alot of Ford development stuff from the 60's. That could be a pretty special unit there. Some google searching for Holley...
to run longer bars you will have to cut the floor. The pick up points for mine are just under the front seat, rear floorboard was completely cut...
Just depends on weight, there are some 280-ish inch motors, up to 350-ish. I don't think anybody has ever run heavy car with a big block in C/G....
Don't put too much faith in the engine size you see painted on the car, or the emblems on the body. Not uncommon for guys to have the engine size...
I've run a Jerico WR4 and a Tex T101 trans in SEGA. Both were circle track units (hard gears) and both failed at about 600-650 hp. Now running a...
What does that mean?
Care to elaborate? I would dare say if you think the gasser scene is a fad, you could be looking in the wrong places. I hope the poser gasser...
since you asked what people think... The gasser scene was winding down in the late 60's when that car would've only been a few years old, they...
Mike, I did a test on the ole Flat Out Falcon. It has a teardrop hood as you know, I taped some yarn on the back side of the teardrop where the...
SEGA officials do tech inspection to make sure the cars follow SEGA rules. There is no NHRA style safety inspection per se, though most if not...
Separate names with a comma.
The Jalopy Journal