The Jalopy Journal
This '53 Plymouth Suburban is going to be my next project...[IMG]
[IMG] 1973 AND LATER See Figure 13 On these models the T.V. cable controls line pressure, shift points, shift feel, part throttle downshifts and...
Cutting the pipes off at an angle like a slash tip might help...
I use rattle can etch primer and semi or gloss Krylon quite often for under-car parts & chassis touch ups... Eastwood also makes a nice spray...
Yes, and wear safety glasses or goggles!
Three more batteries and five more blades than you think... I'd get a Gas Power Chop Saw...
Can't be a Model A! It's a '50 Chrysler you must be thinking about...
[IMG]
Simple bolt on parts if yours is in good shape to start out with will make a world of difference... A High Compression Head, Single 2bbl Intake...
You could mount a small hyd pump to the motor and use a hyd motor to drive the compressor (like a Twin Cessna) but you'll still need a modern...
X2 About 25 years ago there was an old timer that had heard me pull up to his shop in my '38 Chevy Coupe with a 216 and the first thing he said to...
It's 18 miles beyond your bladder limit, low taxes, & dirt roads!
I think it's a great idea! I might try this... Start with laminating resin mixed to go off slow and lay it over your cardboard with one layer...
Separate names with a comma.