The Jalopy Journal
Have the 'Frick ' 4 port Riley head on my '32 block and it is leaking some coolant to the #2 exhaust valve. Need a new head gasket and Max 3 at...
Thanks guys, but the idea here is to retain the stock coil mounted on the distributor. Surely this must have been done in the past. Appreciate all...
Not HOLD the coil...HAS the coil...my typo. I am keep the stock distributor and coil setup. Some 6V instruments will go thru an electronic power...
Ordering a 12V converted generator with fan mount to complete.
Keeping the stock engine and converting to 12 V. Question...original distributor hold the coil which is 6V, how do I connect. 12V through a...
Probably discussed before, but need to know either from past discussions or how can you help me at this time. Appreciated. I have an original...
Thank you Mac VP. The case I use is the 'stronger' case with the full bottom rib extending from front to back. Both front and rear thrust washer...
Can anyone help with with a clearance problem I have with a '39 top loader. My cluster either has to much end play at .021, and with a shim...
The answer is quite simple on the wobble. Learned that in 1962. Auto part store sold me a Volkswagen Beetle steering dampner...bingo...problem...
Good point on the fingers. I am using a '39 Ford top loader trans. This 'new' Chevy pp was actually mounted on a 283/adapter/'39 trans setup. Not...
Have a EAB engine that supposedly came out of a Mercury. I removed the clutch PP and disc and found the PP to be questionable. It has an evenly...
Separate names with a comma.