Register now to get rid of these ads!

RICH B's Recent Activity

  1. RICH B liked Blue One's post in the thread Projects BRIAN MADE ME DO IT.

    Since I don't have a spare car, I've been using the basement and the spare bedroom, my wife is suitably impressed ;) :D:D

    Feb 21, 2018 at 10:49 PM
  2. RICH B replied to the thread Technical Fried distributor y block.

    I've had the wire short out where it passes thru the distributor body. It didn't melt; but found it was getting pretty hot while...

    Feb 21, 2018 at 3:07 PM
  3. RICH B liked Johnboy34's post in the thread Projects BRIAN MADE ME DO IT.

    It wouldn't be so cold if the door was closed and the heat was on.....:D:D:D

    Feb 20, 2018 at 5:28 PM
  4. RICH B liked deucemac's post in the thread Hot Rods Gray Baskerville 1932 Ford Roadster. Any info on the details?.

    I was at SoCal Las Vegas a while back and Ol' Dad's deuce was sitting on the showroom floor. I asked what it was doing there and...

    Feb 20, 2018 at 7:10 AM
  5. RICH B liked Bandit Billy's post in the thread Technical Wft is wrong with my mig welder?.

    You might look for a nut loose behind the trigger. :cool: When mine messes up this is often to blame.

    Feb 19, 2018 at 6:36 PM
  6. RICH B liked Crazy Steve's post in the thread Technical Can someone explain this Quadrajet choke wiring to me?.

    GM three wire alternator, right? You don't have all of the diagram showing, that's why it's confusing. The wire off the alternator to...

    Feb 19, 2018 at 4:53 PM
  7. RICH B replied to the thread Hot Rods Help ID these shock mounts please.

    Mopar mounts; not as versatile (or valuable) as F-1 mounts.

    Feb 19, 2018 at 4:46 PM
  8. RICH B posted a new thread.

    ***SOLD****'39-'41 Ford front backing plate bolts cotter pin type with castle nuts

    ***SOLD***$15.00 Eight good used '39-'41 backing plate bolts and castle nuts. $15.00 shipped contiguous 48 [ATTACH]

    P2190012 (Medium).JPG

    Forum: Parts For Sale

    Feb 19, 2018 at 4:19 PM
  9. RICH B posted a new thread.

    ***SOLD***Ford F-100 Bendix self-energizing juice brakes reconditioned

    ***SOLD*** Thank You $295.00 plus shipping Set of F-100 Ford Bendix brakes. Backing plates have been reconditioned, sandblasted, and...

    P2190001 (Medium).JPG P2190003 (Medium).JPG P2190006 (Medium).JPG P2190007 (Medium).JPG P2190009 (Medium).JPG P2190011 (Medium).JPG

    Forum: Parts For Sale

    Feb 19, 2018 at 4:08 PM
  10. RICH B replied to the thread Technical I'm locked out of my '39 Ford Sedan.

    Hinge pins been out recently?

    Feb 19, 2018 at 11:56 AM
  11. RICH B liked Hollywood-East's post in the thread Customs No Sway bar?.

    Go to another shop!

    Feb 19, 2018 at 11:44 AM
  12. RICH B liked 37gas's post in the thread Technical Wft is wrong with my mig welder?.

    Your machine does not have any mechanical contactors. Current is controlled by S. C. R. on your pc board, the clicking noise you hear is...

    Feb 18, 2018 at 9:48 PM
  13. RICH B replied to the thread Technical 1940 Ford Wishbone == Split Bones Question.

    Not sure what you plan to use to open up the center of the X and mount the trans; but if you use a plate like the old CE kit, you can...

    Feb 18, 2018 at 4:40 PM
  14. RICH B attached a file to the thread Technical 1940 Ford Wishbone == Split Bones Question.

    You will need to use an earlier axle ('32-'36) with those bones so a standard width spring will fit. Yes, the spring eyes will have to...

    35-36 vs 37-40 2.JPG Feb 18, 2018 at 9:25 AM
  15. RICH B replied to the thread Technical 1940 Ford Wishbone == Split Bones Question.

    Those are '35-'36.

    Feb 18, 2018 at 9:06 AM
Register now to get rid of these ads!

Archive

Copyright © 1995-2013 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.