The Jalopy Journal
I've been watching this project for years and am continually amazed by the quality of the work.
Right, and that seems to have been where I screwed up. The actual clearance was much about a paperclip but it took about 3/16s of adjustment to...
Thanks to the help of those on this forum, the brakes are fixed. I checked the pedal assembly, and it is made for manual brakes, so I moved on...
Yes, that is how I have it. I thought the primary was the longer shoe, but in any case, the longer shoe is on the rear.
The primary shoe is to the rear on each wheel, but the difference in length between the primary and secondary is small, maybe an inch. That seems...
Great advice everyone. I'll start by trying to extend the push rod, although I have already extended it a bit. If that helps, I'll pull out the...
Thanks for all the responses guys. Lots of good questions. Here are my answers. - Yes, It has Bendix brakes. - The Walton pedal assembly is a...
I have run out of ideas on this one, and no one I have spoken with can figure this out. The HAMB has the experts, so here I am seeking advice....
[ATTACH]
Years ago I picked up an OT Caddy with a white leather interior that was so filthy I could not drive it. No way the usual interior cleaners would...
I have read that Timing and Vacuum Advance 101 a few times before, and it never gets old. I have found that a LOT of people don't understand how...
Bummer. Why not have it anyway? If 5 people show up, so be it. Almost every show once started small.
I would guess that it ran at New England Dragway in Epping, N.H., so I would start with people who know that track in the 70s. I say 70s, as the...
Saw these this weekend.
Separate names with a comma.
The Jalopy Journal