The Jalopy Journal
Just some insight to how the system works here: Laws & regulations vary by state but here in Kansas for vehicles pre '49 (if I remember...
Wow! I think this is the same place? [MEDIA]
The last batch I bought was from Van Dyke's taxidermy...I ordered baking soda at the same to neutralize it. I'll compare prices once I figure out...
I need to mix a new batch of OA and don't remember what mix ratio I used last time. After searching it seems most people recommend 1-2 heaping...
I know! I doubt it'll be free. I don't mind paying $100 for it, having the fun of digging it up, then selling for $100. I just don't want to...
A friend found this car on a nearby farm and sent me these pictures. I'm trying to figure out what it is to see if it is worth buying & digging...
I have a 40 gallon tub of oxalic acid I've been using for about a year on a lot of parts. It isn't working as well now and I'm getting a lot more...
The HF ones won't fit a 4 barrel unless you disassemble it and rotate it. Only deep enough for half at a time.
Two different cars over a span of around 8 years. Last one that burnt up on me was 2-3 years ago but the car had only been driven about 500 miles...
I always carry points in the glove box because I've had 3-4 Pertronix units quit on me. I've also talked to people that have installed dozens of...
I bought one online from Harbor Freight and used it a lot to do small carbs and other parts...eventually the heater quit. I'd also spilled some...
Just finished putting a trans pan & skidplate back under a truck, cleaned tools & put away....then see the trans filter laying on the bench.
I can't help it. I like nipples.
I ran into the same problem on a '61 Electra. My local radiator shop could order a core that would work much like recoring a radiator. I ended...
Separate names with a comma.