Register now to get rid of these ads!

Pist-n-Broke's Recent Activity

  1. Pist-n-Broke liked amodel25's post in the thread Folks Of Interest Shoebox Central - Great Folks to Deal With.

    If you need parts for your '49 to '51 Ford or Mercury, these folks are the best. Ordered some parts on the computer last Thursday at...

    Nov 11, 2019 at 7:42 PM
  2. Pist-n-Broke liked Bandit Billy's post in the thread Technical Blast Cabinet Troubleshooting.

    1. Is your air regulated off the compressor? My compressor is 120psi, too high for work tools that want 80psi max generally. I split...

    Nov 11, 2019 at 7:37 PM
  3. Pist-n-Broke replied to the thread Technical Shifter question.

    There's always a way. I made the stock 2 speed shifter in my 51 work with a 700-R-4 and P is park R is reverse N is nuteral and L is...

    Nov 11, 2019 at 7:30 PM
  4. Pist-n-Broke replied to the thread Technical Help needed with 54 Ford Crestline temp gauge.

    This is what I was taught somewhere around 1962 and it hasn't failed me yet.

    Nov 11, 2019 at 7:09 PM
  5. Pist-n-Broke liked BJR's post in the thread Technical Help needed with 54 Ford Crestline temp gauge.

    What Pist-n-Broke said. The sender and gauge must match each other, then use a runtz voltage reducer on the power side to the gauge.

    Nov 11, 2019 at 7:08 PM
  6. Pist-n-Broke liked fiftyv8's post in the thread Technical 4 bar front axle?.

    I don't recall seeing on a Model A chassis the top 4 bar arm thru the chassis like that. The top arm pivot point is generally also thru...

    2003A-Four-Bar__16393_1553702685.png Nov 11, 2019 at 6:20 PM
  7. Pist-n-Broke replied to the thread Technical 4 bar front axle?.

    Is that a 32 Chassis?

    Nov 11, 2019 at 6:20 PM
  8. Pist-n-Broke replied to the thread Technical Help needed with 54 Ford Crestline temp gauge.

    I'll say this again. Pair your stock in dash Gauge with it's correct matching stock to the gauge sending unit. They have no idea what...

    Nov 11, 2019 at 6:16 PM
  9. Pist-n-Broke replied to the thread Technical Help needed with 54 Ford Crestline temp gauge.

    Do you have any idea at all what your actual motor temp is? Before I went all Nutz about where the needle is resting in the gauge I'd...

    Nov 11, 2019 at 3:42 PM
  10. Pist-n-Broke replied to the thread Technical Yeah, Its got a Hemi/41 shop truck.

    Nov 10, 2019 at 11:52 PM
  11. Pist-n-Broke liked Bandit Billy's post in the thread Hot Rods Engine rebuilder recomendation in the Portland Or. Area?.

    Ditto on the Archie Somers. I do run a stout little 455 Olds around town. All Mondello built...just sayin

    Nov 10, 2019 at 11:43 PM
  12. Pist-n-Broke replied to the thread Features Kustoms blues? I need to see some kustoms.....

    Change just for the sake of Change don't always work out. [IMG]

    Nov 10, 2019 at 6:53 PM
  13. Pist-n-Broke replied to the thread Hot Rods Engine rebuilder recomendation in the Portland Or. Area?.

    Archie Somers is my guy and probably the most local for you. 360-699-5205 Next is Tabors machine down by the Court House. 360-694-8387...

    Nov 10, 2019 at 6:35 PM
  14. Pist-n-Broke replied to the thread Art & Inspiration '59 Ford Photos......

    Wish that Wheel/Tire combo on the Gray wagon were on my Hardtop.

    Nov 9, 2019 at 9:22 PM
  15. Pist-n-Broke replied to the thread Art & Inspiration '59 Ford Photos......

    Us 59 owners must be a pretty elite bunch.

    Nov 9, 2019 at 9:21 PM
Register now to get rid of these ads!

Archive

Copyright © 1995-2020 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.